HighPoint Technologies, Inc.
HighPoint Technologies, Inc. SSD7540 8-Port NVMe RAID AIC
1 749,99 $US
0.02223226BTC
En stock
HPE
HPE ProLiant DL380 Gen10 2x Xeon Silver 4208 384GB DDR4 rack server
Dual-socket 2.1 GHz Xeon Silver 4208 server with 384 GB DDR4 ECC memory, Smart Array P408 controller, dual 10 GbE plus dual 1 GbE networking, and iLO remote management in a 2U rack chassis
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.1GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size384GB
- Dual Xeon Silver 4208 processors provide 2.1GHz performance
- 384GB DDR4 ECC memory supports demanding workloads
- Smart Array P408 controller manages SAS and SATA drives
- iLO Advanced enables remote server management
- 5in drive bays offer flexible storage configuration
Ready-to-rack server for dense compute
The HPE ProLiant DL380 Gen10 arrives with two Xeon Silver 4208 processors at 2.1GHz and 384GB DDR4 ECC registered memory installed. It targets workloads that need high core counts and large memory capacity in a standard 2U form factor. No drives are fitted, so storage can be tailored to the application.
Simple chassis access with controller awareness
The 2U rackmount slides into standard rails and the front panel releases without tools for drive or memory service. The Smart Array P408 SAS controller manages the internal backplane; mixing SATA drives behind this controller requires correct cabling and firmware alignment. Integrated graphics and dual 500W power supplies are already seated.
Verify backplane count and network needs
The chassis supports up to eight 2.5-inch bays but the exact backplane population varies by build. Confirm the installed network card provides two 10GbE and two 1GbE ports before ordering cables or transceivers. iLO Advanced remote management is licensed and firmware is current. Buyers who need internal boot drives or GPU acceleration must add those separately.
Points forts
- Dual Xeon Silver 4208 processors provide 2.1GHz performance
- 384GB DDR4 ECC memory supports demanding workloads
- Smart Array P408 controller manages SAS and SATA drives
- iLO Advanced enables remote server management
- 5in drive bays offer flexible storage configuration
Caractéristiques
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.1GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 384GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 20,00 |
| Storage Controller | HPE Smart Array P408 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
How do I confirm the iLO Advanced remote management and dual 10GbE network ports are active after installation?
After powering on, open a browser to the iLO IP shown on the front panel display; the login screen should appear and the dashboard will report both 10GbE links as up when cables are connected.
Which components ship installed and which must be ordered separately for the HPE ProLiant DL380 Gen10?
The chassis arrives with two Xeon Silver 4208 processors, 384GB DDR4 ECC memory, a Smart Array P408 SAS controller, dual 500W power supplies and the Intel I350/X540 quad-port NIC; drive bays are empty so 2.5" SATA or SAS drives must be purchased separately.
Should I choose the 384GB DDR4 configuration or add more memory up to the 3TB maximum?
Select 384GB if your current workloads fit within that capacity; choose a larger DDR4 ECC registered kit only when applications require more than 384GB, because the board supports up to 3TB across 24 DIMM slots.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
HighPoint Technologies, Inc.
HighPoint Technologies, Inc. SSD7502 2-Port M.2 NVMe RAID Controller
708,99 $US
0.00900717BTC
En stock
