HighPoint Technologies, Inc.
HighPoint Technologies, Inc. SSD7540 8-Port NVMe RAID AIC
1 749,99 $US
0.02223226BTC
En stock
HPE
HPE ProLiant DL380 Gen9 4LFF 2x Xeon E5-2667 v4 384GB DDR4 rack server
Rack server with two 3.2 GHz Xeon processors, 384 GB DDR4 memory, P440 SAS controller, and four 3.5-inch drive bays
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed3.2GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size384GB
- Dual 3.2 GHz Xeon processors deliver 16 cores for demanding workloads
- 384 GB DDR4 ECC memory supports large virtualisation and database tasks
- HPE Smart Array P440 controller provides hardware RAID for data protection
- Four 3.5-inch drive bays allow flexible SATA storage expansion
- Integrated iLO remote management enables out-of-band server administration
HPE ProLiant DL380 Gen9 4LFF server
The HPE ProLiant DL380 Gen9 is a 4LFF rack server built for data-centre workloads. Two Xeon E5-2667 v4 processors run at 3.2GHz with eight cores each and 25MB cache. The system ships with 384GB of DDR4 ECC registered memory and a P440 PCIe SAS controller. No drives are installed, leaving the four 3.5-inch bays open for SATA or SAS media.
Suits compute-heavy virtualisation hosts needing
This configuration targets buyers who want maximum installed RAM and strong single-thread performance in a 2U form factor. The dual 500W Flex Slot supplies and iLO Advanced remote management support continuous operation. Buyers who need more than four drive bays, GPU acceleration, or 10GbE networking out of the box should look at larger chassis or add-on cards.
Four 3.5-inch LFF bays define storage capacity
The chassis accepts up to four large-form-factor drives connected through the onboard P440 SAS controller. This bay count fixes the raw storage ceiling and RAID options before any expansion shelf is added. Buyers planning larger direct-attached arrays must account for this limit when sizing the deployment.
Points forts
- Dual 3.2 GHz Xeon processors deliver 16 cores for demanding workloads
- 384 GB DDR4 ECC memory supports large virtualisation and database tasks
- HPE Smart Array P440 controller provides hardware RAID for data protection
- Four 3.5-inch drive bays allow flexible SATA storage expansion
- Integrated iLO remote management enables out-of-band server administration
Caractéristiques
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 3.2GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 384GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 16,00 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
What drive bays and caddies does the 4LFF chassis require for storage?
The 4LFF chassis supports up to four 3.5-inch drive bays; matching LFF caddies are needed to install SATA or SAS drives with the P440 controller.
Can the two installed Xeon E5-2667 v4 processors run with existing DDR4 ECC registered modules I already own?
Yes, the server uses DDR4 ECC registered memory; any compatible DDR4 ECC RDIMMs can be added up to the 3 TB maximum capacity.
How do I confirm the P440 controller and iLO remote management are active after installation?
During POST the P440 option ROM appears and the iLO network port shows a link light; both can then be accessed via F10 and the iLO web interface.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
HighPoint Technologies, Inc.
HighPoint Technologies, Inc. SSD7502 2-Port M.2 NVMe RAID Controller
708,99 $US
0.00900717BTC
En stock
