HPE
HPE ProLiant DL380 Gen9 8SFF 2x Xeon E5-2687W v3 512GB DDR4 rack server
A 2U rack server with two 10-core Xeon CPUs at 3.1 GHz, 512 GB DDR4 ECC memory and an eight-bay 2.5-inch SAS/SATA chassis ready for custom storage
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed3.1 GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size512GB
- Dual 10-core Xeon CPUs at 3.1 GHz deliver high compute density
- 512 GB DDR4 ECC registered memory supports large virtualisation workloads
- Eight 2.5-inch drive bays with P440 SAS controller enable flexible storage arrays
- Integrated iLO Advanced remote management simplifies lights-out administration
- Redundant 500 W flex-slot power supplies maintain uptime during power events
Built for dense compute and virtualisation
The HPE ProLiant DL380 Gen9 8SFF rack server ships with two Xeon E5-2687W v3 processors at 3.1 GHz and 512 GB of DDR4 ECC registered memory. It is aimed at IT teams that run heavy virtualisation, database or HPC workloads and need maximum core density in a 2U chassis. The Smart Array P440 SAS controller and eight 2.5-inch drive bays are ready for the storage configuration you choose.
Suited to teams that can populate storage
Buyers who need drives included should look elsewhere because the unit ships without any installed storage. Organisations requiring GPU acceleration will not find discrete graphics here, only integrated graphics. Environments that demand more than two sockets or memory beyond 3 TB should evaluate larger platforms.
The dual 10-core 3.1 GHz Xeon configuration
Twenty cores at a high base frequency deliver strong single-thread and multi-thread throughput for licensing models that charge per core. If your workload benefits from that frequency profile, this server matches it; if you need higher core counts at lower clocks, a different processor choice is required.
Points forts
- Dual 10-core Xeon CPUs at 3.1 GHz deliver high compute density
- 512 GB DDR4 ECC registered memory supports large virtualisation workloads
- Eight 2.5-inch drive bays with P440 SAS controller enable flexible storage arrays
- Integrated iLO Advanced remote management simplifies lights-out administration
- Redundant 500 W flex-slot power supplies maintain uptime during power events
Caractéristiques
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 3.1 GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 512GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 8,00 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
What rack depth does the 36-inch deep DL380 Gen9 require for mounting?
The chassis is 36 inches deep, so the rack must provide at least 36 inches of usable rail depth; verify your cabinet's maximum mounting depth before ordering rails.
How are the two Xeon E5-2687W v3 processors installed, and what step is often missed?
Both CPU sockets are already populated with the 3.1 GHz 10-core processors; the common oversight is skipping the iLO firmware update that enables full remote management after installation.
When will the 512GB DDR4 ECC registered memory need replacement or expansion?
The system holds 512GB across its DIMM slots and supports up to 3TB total; plan to add matching DDR4 ECC registered modules when workloads exceed the current capacity.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



