Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Small rectangular 1.8 inch SATA SSD with black circuit board and silver label

KingSpec

KingSpec ACJC2M128S18 128GB 1.8-inch SATA internal SSD

SKU CH-P2XC-BT708 MPN ACJC2M128S18

A 1.8-inch SATA solid-state drive holding 128GB with MLC NAND, delivering read speeds up to 495MB/s and write speeds up to 191MB/s via a JMicron JMF608 controller

  • Read speeds up to 495 MB/s for quick boot times
  • Write speeds up to 191 MB/s for responsive file saves
  • 128 GB capacity stores OS and essential apps
  • 8-inch SATA form factor fits legacy laptops and industrial gear
  • 1,000,000-hour MTBF and 0 °C to 70 °C rating for long service life

KingSpec 128 GB 1.8-inch SATA SSD

This KingSpec ACJC2M128S18 is a 128 GB internal solid-state drive built in the 1.8-inch form factor with a SATA III interface. It uses a JMicron JMF608 controller and MLC NAND flash to deliver sequential reads up to 495 MB/s and writes up to 191 MB/s. The drive is suited to any Windows or Mac system that provides a standard SATA connection.

Suits older laptops and embedded systems needing

The 1.8-inch size and SATA III interface make this drive a direct fit for legacy notebooks, industrial PCs or compact appliances that only accept this physical format. Buyers whose hardware requires a 2.5-inch drive, an M.2 module or a higher capacity than 128 GB will need a different part.

1.8-inch form factor decides compatibility

The single specification that determines whether this SSD works is its 1.8-inch physical size combined with the SATA III connector. If the target device does not have a matching 1.8-inch SATA bay, the drive cannot be installed regardless of its performance figures.

Points forts

  • Read speeds up to 495 MB/s for quick boot times
  • Write speeds up to 191 MB/s for responsive file saves
  • 128 GB capacity stores OS and essential apps
  • 8-inch SATA form factor fits legacy laptops and industrial gear
  • 1,000,000-hour MTBF and 0 °C to 70 °C rating for long service life

Caractéristiques

Aucune caractéristique publiée pour cet article pour l’instant.

Questions sur cet article

What do I need in my system for this 1.8-inch SATA III drive to work?

Any Windows or Mac system with a SATA interface will accept the 128GB ACJC2M128S18; the JMicron JMF608 controller and MLC NAND Flash handle the rest.

Can I keep using an older SATA II controller with this SSD?

The drive runs on SATA III at up to 495MB/sec read and 191MB/sec write, and will negotiate down to SATA II speeds if the host controller only supports that standard.

How can I verify the ACJC2M128S18 is healthy after installation?

Enable SMART monitoring in your OS or BIOS; the drive reports temperature (0°C–70°C range), media wear and other health attributes through the standard SMART interface.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.