Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Green circuit board with black memory chips, gold edge connectors, no heat spreader

Kingston Technology Corp.

Kingston Technology Corp. KTH-PL426D8/16G 16GB DDR4 2666 CL19 ECC Registered server RAM

SKU CH-PPFX-7SR01 MPN KTH-PL426D8/16G

16 GB DDR4 ECC Registered DIMM at 2666 MHz CL19 1.20 V for server workloads

  • Capacity16GB
  • Type288-Pin DDR5 SDRAM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes
  • 16 GB capacity handles heavy workloads smoothly
  • 2666 MHz DDR4 speed with CL19 latency runs demanding apps
  • ECC and registered design ensures data integrity
  • 20 V operation reduces power consumption
  • 288-pin DIMM form factor fits standard server slots

Server memory for heavy workloads

This 16 GB DDR4 module runs at 2666 MHz with CL19 latency and operates at 1.20 V. It is built for servers and workstations that need ECC protection and registered signal processing. The 288-pin DIMM format fits compatible enterprise platforms.

Thermals and power in normal use

The module draws 1.20 V and has no heat spreader, relying on chassis airflow for cooling. Registered buffering reduces the electrical load on the memory controller during sustained operation. Standard DDR4 power characteristics apply under typical server workloads.

Upgrade path and when it matters

This kit replaces lower-capacity or non-ECC DDR4 DIMMs in systems that support registered memory and Intel XMP 2.0 profiles. The jump is worthwhile when error correction and signal integrity are required for data integrity. It is not suited for consumer boards that only accept unbuffered memory.

Points forts

  • 16 GB capacity handles heavy workloads smoothly
  • 2666 MHz DDR4 speed with CL19 latency runs demanding apps
  • ECC and registered design ensures data integrity
  • 20 V operation reduces power consumption
  • 288-pin DIMM form factor fits standard server slots

Caractéristiques

BrandKingston
ModelKTH-PL426D8/16G
Capacity16GB
Type288-Pin DDR5 SDRAM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
BIOS/Performance ProfileIntel XMP 2.0
Heat SpreaderNo
Poids d’expédition0.02 kg
Dimensions du colis168 × 51 × 15 mm

Questions sur cet article

How do I install the 288-pin DDR4 DIMM and what step is often missed?

Align the notch on the module with the slot key, press firmly until both retention clips click, then verify the registered ECC module is recognised in BIOS at 2666 MHz with CL19 timings.

What maintenance or replacement will the 16 GB registered ECC module need over time?

No routine maintenance is required; if errors appear, run a memory diagnostic and replace the module if it fails, as ECC cannot correct every fault.

What limit appears first when the 1.2 V DDR4-2666 CL19 kit runs sustained workloads?

The CL19 latency at 2666 MHz sets the throughput ceiling; thermal throttling is unlikely without a heat spreader, so bandwidth tops out at the rated PC4-21300 speed.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.