We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, gold edge connectors, no heat spreader

Kingston Technology Corp.

Kingston Technology Corp. KTH-PL426D8/16G 16GB DDR4 2666 CL19 ECC Registered server RAM

SKU CH-PPFX-7SR01 MPN KTH-PL426D8/16G

16 GB DDR4 ECC Registered DIMM at 2666 MHz CL19 1.20 V for server workloads

  • Capacity16GB
  • Type288-Pin DDR5 SDRAM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes
  • 16 GB capacity handles heavy workloads smoothly
  • 2666 MHz DDR4 speed with CL19 latency runs demanding apps
  • ECC and registered design ensures data integrity
  • 20 V operation reduces power consumption
  • 288-pin DIMM form factor fits standard server slots

Server memory for heavy workloads

This 16 GB DDR4 module runs at 2666 MHz with CL19 latency and operates at 1.20 V. It is built for servers and workstations that need ECC protection and registered signal processing. The 288-pin DIMM format fits compatible enterprise platforms.

Thermals and power in normal use

The module draws 1.20 V and has no heat spreader, relying on chassis airflow for cooling. Registered buffering reduces the electrical load on the memory controller during sustained operation. Standard DDR4 power characteristics apply under typical server workloads.

Upgrade path and when it matters

This kit replaces lower-capacity or non-ECC DDR4 DIMMs in systems that support registered memory and Intel XMP 2.0 profiles. The jump is worthwhile when error correction and signal integrity are required for data integrity. It is not suited for consumer boards that only accept unbuffered memory.

Highlights

  • 16 GB capacity handles heavy workloads smoothly
  • 2666 MHz DDR4 speed with CL19 latency runs demanding apps
  • ECC and registered design ensures data integrity
  • 20 V operation reduces power consumption
  • 288-pin DIMM form factor fits standard server slots

Specifications

BrandKingston
ModelKTH-PL426D8/16G
Capacity16GB
Type288-Pin DDR5 SDRAM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
BIOS/Performance ProfileIntel XMP 2.0
Heat SpreaderNo
Shipping weight0.02 kg
Package size168 × 51 × 15 mm

Questions about this item

How do I install the 288-pin DDR4 DIMM and what step is often missed?

Align the notch on the module with the slot key, press firmly until both retention clips click, then verify the registered ECC module is recognised in BIOS at 2666 MHz with CL19 timings.

What maintenance or replacement will the 16 GB registered ECC module need over time?

No routine maintenance is required; if errors appear, run a memory diagnostic and replace the module if it fails, as ECC cannot correct every fault.

What limit appears first when the 1.2 V DDR4-2666 CL19 kit runs sustained workloads?

The CL19 latency at 2666 MHz sets the throughput ceiling; thermal throttling is unlikely without a heat spreader, so bandwidth tops out at the rated PC4-21300 speed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.