BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.
Kingston Technology Corp.
1GB DDR 333 PC 2700 CL2.5 184-pin unbuffered memory module for system upgrades
This 1GB DDR SDRAM module runs at 333 MHz with a PC 2700 rating and CL2.5 latency. It uses the 184-pin form factor and operates at 2.50V without ECC or registered buffering. The stick is aimed at owners of legacy desktops or workstations that require this specific DDR generation for maintenance or modest capacity upgrades.
The module has no heat spreader and draws power at the standard 2.50V for DDR 333. Passive cooling relies on case airflow, so silent operation is typical in a properly ventilated chassis. Power consumption remains low and consistent with the DDR specification for this speed grade.
The unbuffered 184-pin design fits motherboards built for DDR 333 memory. Adding this single 1GB stick frees remaining slots for additional modules of the same type. Systems needing ECC, registered memory, higher capacities per module or faster DDR speeds cannot use this part.
| Brand | Kingston |
|---|---|
| Series | ValueRAM |
| Model | KVR333X64C25/1G |
| Capacity | 1GB |
| Type | 184-Pin DDR SDRAM |
| Speed | DDR 333 (PC 2700) |
| CAS Latency | CL2.5 |
| Voltage | 2.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Poids d’expédition | 0.09 kg |
| Dimensions du colis | 170 × 56 × 15 mm |
Align the notch on the module with the key in the 184-pin slot, press down firmly until both retention clips click into place, and verify the system detects the full 1GB at DDR 333 speed.
No scheduled maintenance is required; keep the contacts clean and ensure the motherboard supplies a steady 2.50V. Replace the module only if memory errors appear or capacity becomes insufficient.
The CAS latency of CL2.5 at DDR 333 sets the timing boundary; sustained workloads will hit this latency limit before bandwidth or voltage constraints become an issue.
Également dans ce rayon
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
Ce que vous envoyez, et ce dans quoi vous lisez les prix.
Envoyé depuis votre portefeuille à la caisse
Affichage seul — le catalogue est libellé en dollars
Aucune monnaie ne correspond.
Choisissez la langue dans laquelle le site vous parle.
Aucune langue ne correspond.
Première visite ?
Vous avez déjà un compte ?
Il n’y a pas de réinitialisation automatique : cette boutique n’envoie aucun e-mail, il n’existe donc aucun lien à usage unique à demander. Laissez l’adresse sur le compte, elle sera traitée à la main.
Demande enregistrée
Rien n’arrivera dans votre boîte de réception — cette boutique n’envoie aucun e-mail. Quelqu’un s’en occupe à la main.
Vous l’avez retrouvé ?