我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

Kingston Technology Corp.

Kingston Technology Corp. KVR333X64C25/1G 1GB DDR 333 PC 2700 CL2.5 184-Pin memory upgrade

SKU CH-1YVE-A7059 MPN KVR333X64C25/1G

1GB DDR 333 PC 2700 CL2.5 184-pin unbuffered memory module for system upgrades

  • Capacity1GB
  • Type184-Pin DDR SDRAM
  • SpeedDDR 333 (PC 2700)
  • CAS LatencyCL2.5
  • Voltage2.50V
  • ECCNo
  • 1GB capacity for DDR 333 systems
  • CL2.5 latency improves data access
  • Unbuffered design for standard desktop use
  • 184-pin DDR SDRAM module fits compatible boards
  • 50V operation matches PC2700 specification

Kingston ValueRAM 1GB DDR 333

This 1GB DDR SDRAM module runs at 333 MHz with a PC 2700 rating and CL2.5 latency. It uses the 184-pin form factor and operates at 2.50V without ECC or registered buffering. The stick is aimed at owners of legacy desktops or workstations that require this specific DDR generation for maintenance or modest capacity upgrades.

Thermals noise and power draw

The module has no heat spreader and draws power at the standard 2.50V for DDR 333. Passive cooling relies on case airflow, so silent operation is typical in a properly ventilated chassis. Power consumption remains low and consistent with the DDR specification for this speed grade.

Build fit and system impact

The unbuffered 184-pin design fits motherboards built for DDR 333 memory. Adding this single 1GB stick frees remaining slots for additional modules of the same type. Systems needing ECC, registered memory, higher capacities per module or faster DDR speeds cannot use this part.

商品特色

  • 1GB capacity for DDR 333 systems
  • CL2.5 latency improves data access
  • Unbuffered design for standard desktop use
  • 184-pin DDR SDRAM module fits compatible boards
  • 50V operation matches PC2700 specification

商品規格

BrandKingston
SeriesValueRAM
ModelKVR333X64C25/1G
Capacity1GB
Type184-Pin DDR SDRAM
SpeedDDR 333 (PC 2700)
CAS LatencyCL2.5
Voltage2.50V
ECCNo
Buffered/RegisteredUnbuffered
Heat SpreaderNo
出貨重量0.09 kg
包裝尺寸170 × 56 × 15 mm

商品問答

How do I install this 184-pin DDR SDRAM module, and what step is often missed?

Align the notch on the module with the key in the 184-pin slot, press down firmly until both retention clips click into place, and verify the system detects the full 1GB at DDR 333 speed.

What maintenance or replacement will this unbuffered 1GB module need over time?

No scheduled maintenance is required; keep the contacts clean and ensure the motherboard supplies a steady 2.50V. Replace the module only if memory errors appear or capacity becomes insufficient.

What limit appears first when this CL2.5 memory runs under sustained load?

The CAS latency of CL2.5 at DDR 333 sets the timing boundary; sustained workloads will hit this latency limit before bandwidth or voltage constraints become an issue.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。