Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Green 240-pin DDR2 server memory module with black chips, no heat spreader

Kingston Technology Corp.

Kingston Technology Corp. KVR667D2D8P5/1G 1GB DDR2 667 ECC Registered server RAM

SKU CH-7YZJ-ZTCNC MPN KVR667D2D8P5/1G

1 GB DDR2 667 registered ECC server memory with CL5 latency and 1.80 V operation

  • Capacity1GB
  • Type240-Pin DDR2 SDRAM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Voltage1.80V
  • ECCYes
  • ECC protection detects and corrects single-bit memory errors
  • Registered buffering reduces electrical load on the server memory controller
  • DDR2 667 speed delivers 5300 MB/s bandwidth for compatible platforms
  • CL5 latency timing supports stable operation at rated frequency
  • 80 V operating voltage matches standard DDR2 server specifications

1 GB DDR2 667 ECC Registered module

This 1 GB DDR2 667 (PC2 5300) module is built for servers and workstations that require registered ECC memory. It fits 240-pin DIMM slots and operates at a standard 1.80 V with CL5 latency. The registered buffer helps maintain signal integrity on heavily populated motherboards. It is not suited for consumer desktops or laptops that use unbuffered non-ECC memory.

Thermals and power in normal use

Without a heat spreader the module relies on case airflow for cooling, which is typical for registered DDR2 server DIMMs. Power draw stays low at the standard 1.80 V, so additional cooling is rarely needed in a properly ventilated chassis. Acoustic impact is negligible because the component has no moving parts. Servers with restricted airflow should still verify adequate circulation around the memory slots.

Build integration and trade-offs

The 240-pin form factor requires a motherboard with DDR2 registered DIMM slots and chipset support for ECC. Each stick adds 1 GB of capacity, so larger memory configurations need multiple free slots. The registered design limits compatibility to platforms that explicitly support buffered memory. Builders needing higher densities or faster speeds must select different modules.

Points forts

  • ECC protection detects and corrects single-bit memory errors
  • Registered buffering reduces electrical load on the server memory controller
  • DDR2 667 speed delivers 5300 MB/s bandwidth for compatible platforms
  • CL5 latency timing supports stable operation at rated frequency
  • 80 V operating voltage matches standard DDR2 server specifications

Caractéristiques

BrandKingston
ModelKVR667D2D8P5/1G
Capacity1GB
Type240-Pin DDR2 SDRAM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Voltage1.80V
ECCYes
Buffered/RegisteredRegistered
Heat SpreaderNo
Poids d’expédition0.09 kg
Dimensions du colis170 × 56 × 15 mm

Questions sur cet article

How do I install this 240-Pin DDR2 ECC Registered module, and what step is often missed?

Align the notch with the slot key, press firmly until both retention clips click, then verify the server BIOS recognises the registered buffer at POST.

What maintenance or replacement will this 1GB DDR2 667 module need over time?

No routine maintenance is required; replace only if memory diagnostics report uncorrectable ECC errors or the server fails to boot.

What limit appears first when this CL5 1.80V registered DIMM runs under sustained load?

The DDR2 667 bandwidth ceiling is reached before thermal limits, since the module has no heat spreader and operates at standard voltage.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.