Montech
Montech HS01 (B) PC Case Black ATX Mid-Tower
ATX mid-tower with reversible layout, mesh front panel and vertical GPU support holds 420 mm graphics cards and 360 mm top radiators
- ColorBlack
- Case MaterialSPCC / Tempered Glass
- Motherboard CompatibilityATX / Micro ATX / Mini ITX
- Internal 3.5" Drive Bays2
- Internal 2.5" Drive Bays2
- Expansion Slots14
- Reversible layout lets you mirror the build left or right
- Vertical airflow path draws cool air from below and exhausts it above
- Mesh front panel supports up to 120 mm fans on three sides for high airflow
- Rotatable PCIe slots enable a vertical GPU install without extra brackets
- PSU relocated to the rear suits back-connect motherboards and hides cables
Montech HS01 reversible mid-tower
The Montech HS01 is a black ATX mid-tower case built from SPCC steel and tempered glass. It accepts ATX, Micro-ATX and Mini-ITX motherboards and provides fourteen expansion slots for flexible card placement. The reversible layout lets the whole interior flip to the opposite side for desk positioning.
Chimney airflow and vertical GPU support
A mesh front panel feeds bottom intake while top exhaust creates a natural chimney effect. The case supports three 120 mm fans at the bottom, front and top plus two at the rear. Radiator clearance reaches 360 mm on top and 120 mm at the rear and bottom. Rotatable PCIe slots enable a vertical graphics card without extra brackets.
Clearance limits and drive capacity
Maximum graphics card length is 420 mm, CPU cooler height is 175 mm and power supply length is 200 mm. Two internal 3.5 inch bays and two 2.5 inch bays handle storage. The relocated PSU area works with Back-Connect motherboards for cleaner cable routing. Check your cooler, GPU and PSU dimensions against these limits before ordering.
Points forts
- Reversible layout lets you mirror the build left or right
- Vertical airflow path draws cool air from below and exhausts it above
- Mesh front panel supports up to 120 mm fans on three sides for high airflow
- Rotatable PCIe slots enable a vertical GPU install without extra brackets
- PSU relocated to the rear suits back-connect motherboards and hides cables
Caractéristiques
| Brand | Montech |
|---|---|
| Part Number | HS01(B) |
| Color | Black |
| Case Material | SPCC / Tempered Glass |
| Motherboard Compatibility | ATX / Micro ATX / Mini ITX |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 2 |
| Expansion Slots | 14 |
| Fan Options | Bottom - 3 x 120mm / Front - 3 x 120mm / Rear - 2 x 120mm / Top - 3 x 120mm |
| Radiator Options | Bottom - Up to 120mm / Rear - Up to 120mm / Top - Up to 360mm |
| Max GPU Length | 420 mm |
| Max CPU Cooler Height | 175 mm |
| Max PSU Length | 200 mm |
| Dimensions | 18.91" x 9.45" x 18.91" |
| Poids d’expédition | 12.34 kg |
| Dimensions du colis | 584 × 559 × 330 mm |
Questions sur cet article
How often will the front mesh panel and bottom intake need cleaning to keep airflow strong?
The mesh front panel and bottom intake draw air directly into the case, so dust builds up on the filters. Remove and rinse the magnetic filters every few months, or more often in dusty rooms, to maintain the chimney-effect cooling path.
With a 420 mm graphics card and a 360 mm top radiator installed, which dimension hits its limit first?
The 420 mm maximum GPU length is the tighter constraint; a 360 mm radiator fits in the top, but long triple-fan cards leave only a few millimetres of clearance before the front panel.
How loud and hot does the case get when all thirteen fan mounts are populated and the system runs all day?
Noise and temperature depend on the fans you choose and their speed curves; the case itself adds no active cooling, so select quiet PWM fans and tune curves in BIOS for the acoustic and thermal profile you prefer.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
segotep
segotep 850W ATX 3.1 PCIe 5.1 80 Plus Gold Full Modular power supply
- ATX 3.1 Compatible
- 20+4 Pin
75,99 $US
0.00097707BTC
En stock