NEMIX RAM
NEMIX RAM 1.5TB 16x96GB DDR5 6400MHz CL52 1.1V 2Rx4 ECC RDIMM Kit Supermicro H14DST-FL memory upgrade
1.5 TB DDR5 ECC RDIMM kit with 16 modules of 96 GB at 6400 MHz CL52 1.1 V 2Rx4 registered for Supermicro H14DST-FL
- Capacity1.5TB (16 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 5 TB total capacity from sixteen 96 GB modules
- DDR5 6400 speed with CL52 latency for rated throughput
- Registered ECC design corrects errors and supports full population
- 1 V operation matches the Supermicro H14DST-FL memory controller
- 288-pin RDIMM form factor fits the board's DIMM slots exactly
1.5TB DDR5 ECC RDIMM Kit for Supermicro H14DST-FL
This 1.5TB kit contains sixteen 96GB DDR5 6400MHz Registered ECC RDIMMs. It operates at 1.1V with CL52 latency and a 2Rx4 rank structure. The 288-pin modules are built with major OEM chips for the Supermicro H14DST-FL motherboard.
Suited For Full-Population Server Builds Only
This kit suits administrators upgrading a Supermicro H14DST-FL to its maximum supported capacity with registered ECC memory. It is not for systems requiring unbuffered UDIMMs, SODIMM form factors, non-ECC memory, or kits with fewer than sixteen modules.
2Rx4 Registered ECC Architecture Decides
The 2Rx4 registered ECC design offloads the memory controller to support full-slot population at rated speed. Verify your motherboard manual confirms support for this specific rank, voltage, and registered DIMM type before installation.
Points forts
- 5 TB total capacity from sixteen 96 GB modules
- DDR5 6400 speed with CL52 latency for rated throughput
- Registered ECC design corrects errors and supports full population
- 1 V operation matches the Supermicro H14DST-FL memory controller
- 288-pin RDIMM form factor fits the board's DIMM slots exactly
Caractéristiques
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K16 |
| Capacity | 1.5TB (16 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1.5TB 16X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Questions sur cet article
How do I install the 16 DDR5 288-pin RDIMM modules in the Supermicro H14DST-FL and what step is commonly missed?
Power down, open the chassis, and insert each 96 GB module into the slots specified by the motherboard manual’s population order; the step most often missed is following that exact sequence so all 16 modules are recognised at 6400 MHz.
What maintenance or replacement will the 1.5 TB DDR5 ECC RDIMM kit need over its service life?
No routine maintenance is required; the modules have no heat spreaders or moving parts, and ECC corrects single-bit errors automatically, so replacement only occurs if a module fails and the lifetime warranty covers it.
What limit appears first when the 16x96 GB DDR5 6400 CL52 kit runs sustained workloads on the H14DST-FL?
The memory controller’s maximum supported capacity and rank-per-channel limit for 2Rx4 registered DIMMs is reached first; once all 16 slots are populated at 1.1 V, you cannot add more memory without changing the platform.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
104,99 $US
0.00134817BTC
En stock
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
7,99 $US
0.0001026BTC
En stock