我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Sixteen green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 1.5TB 16x96GB DDR5 6400MHz CL52 1.1V 2Rx4 ECC RDIMM Kit Supermicro H14DST-FL memory upgrade

SKU CH-A30M-PJPFX

1.5 TB DDR5 ECC RDIMM kit with 16 modules of 96 GB at 6400 MHz CL52 1.1 V 2Rx4 registered for Supermicro H14DST-FL

  • Capacity1.5TB (16 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 5 TB total capacity from sixteen 96 GB modules
  • DDR5 6400 speed with CL52 latency for rated throughput
  • Registered ECC design corrects errors and supports full population
  • 1 V operation matches the Supermicro H14DST-FL memory controller
  • 288-pin RDIMM form factor fits the board's DIMM slots exactly

1.5TB DDR5 ECC RDIMM Kit for Supermicro H14DST-FL

This 1.5TB kit contains sixteen 96GB DDR5 6400MHz Registered ECC RDIMMs. It operates at 1.1V with CL52 latency and a 2Rx4 rank structure. The 288-pin modules are built with major OEM chips for the Supermicro H14DST-FL motherboard.

Suited For Full-Population Server Builds Only

This kit suits administrators upgrading a Supermicro H14DST-FL to its maximum supported capacity with registered ECC memory. It is not for systems requiring unbuffered UDIMMs, SODIMM form factors, non-ECC memory, or kits with fewer than sixteen modules.

2Rx4 Registered ECC Architecture Decides

The 2Rx4 registered ECC design offloads the memory controller to support full-slot population at rated speed. Verify your motherboard manual confirms support for this specific rank, voltage, and registered DIMM type before installation.

商品特色

  • 5 TB total capacity from sixteen 96 GB modules
  • DDR5 6400 speed with CL52 latency for rated throughput
  • Registered ECC design corrects errors and supports full population
  • 1 V operation matches the Supermicro H14DST-FL memory controller
  • 288-pin RDIMM form factor fits the board's DIMM slots exactly

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K16
Capacity1.5TB (16 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 16X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

商品問答

How do I install the 16 DDR5 288-pin RDIMM modules in the Supermicro H14DST-FL and what step is commonly missed?

Power down, open the chassis, and insert each 96 GB module into the slots specified by the motherboard manual’s population order; the step most often missed is following that exact sequence so all 16 modules are recognised at 6400 MHz.

What maintenance or replacement will the 1.5 TB DDR5 ECC RDIMM kit need over its service life?

No routine maintenance is required; the modules have no heat spreaders or moving parts, and ECC corrects single-bit errors automatically, so replacement only occurs if a module fails and the lifetime warranty covers it.

What limit appears first when the 16x96 GB DDR5 6400 CL52 kit runs sustained workloads on the H14DST-FL?

The memory controller’s maximum supported capacity and rank-per-channel limit for 2Rx4 registered DIMMs is reached first; once all 16 slots are populated at 1.1 V, you cannot add more memory without changing the platform.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。