Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Four green DDR4 UDIMM sticks with black chips no heat spreader

NEMIX RAM

NEMIX RAM 128GB (4x32GB) DDR4 2933 ECC UDIMM CL21 1.2V 2Rx8 memory upgrade

SKU CH-N6T9-5HY1G

128GB kit of four 32GB DDR4 2933 ECC UDIMM modules at CL21 and 1.2V, validated for Supermicro X12SCZ-F and X12SCZ-TLN4F motherboards

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes

Size 128GB 4X32GB

  • 128 GB total capacity from four 32 GB modules
  • DDR4 2933 speed rated at PC4-23400 for rated throughput
  • ECC function detects and corrects single-bit errors on the fly
  • Unbuffered 288-pin UDIMM form factor matches Supermicro X12SCZ-F / TLN4F requirements
  • CL21 latency at 1.2 V for stable operation within spec

System-specific ECC upgrade

This 128 GB kit contains four 32 GB DDR4 2933 modules built for Supermicro X12SCZ-F and X12SCZ-TLN4F motherboards. The unbuffered ECC UDIMM format matches the board's 288-pin slots and population rules. It is intended for servers and workstations that require error-correcting memory at the rated speed. Builders using consumer boards or registered DIMM platforms cannot use this kit.

Verified 2Rx8 rank and 1.2 V operation

The memory controller expects a 2Rx8 organisation at 1.20 V with CL21 timing; this kit meets those exact electrical parameters. Correct rank structure and voltage ensure the system recognises the full 128 GB capacity and runs at PC4-23400 without down-clocking. Modules with different rank counts or voltages will not post or will operate at reduced performance.

Passive thermals and standard DDR4 power

Without a heat spreader the modules rely on chassis airflow, which is typical for 1.2 V DDR4 UDIMMs in server enclosures. Power draw stays within the standard DDR4 envelope for this voltage and density. Acoustic impact is zero because no active cooling is present. Environments with restricted airflow should verify case cooling capacity before installation.

Points forts

  • 128 GB total capacity from four 32 GB modules
  • DDR4 2933 speed rated at PC4-23400 for rated throughput
  • ECC function detects and corrects single-bit errors on the fly
  • Unbuffered 288-pin UDIMM form factor matches Supermicro X12SCZ-F / TLN4F requirements
  • CL21 latency at 1.2 V for stable operation within spec

Caractéristiques

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered UDIMM Memory
Part NumberME23400-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR4 2933MHz PC4-23400 2Rx8 1.2V 288-PIN ECC UDIMM KIT

Autres versions de ce modèle

5 de plus dans cette gamme

Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.

Questions sur cet article

Will 2933 MT/s DDR4 actually run at 2933 MT/s on a Supermicro X12SCZ-F?

Yes — the kit is spec-matched to the board's memory controller, so the 2933 MT/s rating is recognised and sustained at full 128 GB capacity.

Does the PC4-23400 label limit bandwidth on this platform?

PC4-23400 is simply the JEDEC bandwidth designation for DDR4-2933; the modules deliver that throughput when the motherboard populates all four slots per its validated rules.

What physical clearance do the 288-pin UDIMMs need in the Supermicro chassis?

Standard 288-pin UDIMM height with no heat spreader, so they fit the regular DIMM sockets on the X12SCZ-F / X12SCZ-TLN4F without interfering with CPU coolers or airflow guides.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.