暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR4 UDIMM sticks with black chips no heat spreader

NEMIX RAM

NEMIX RAM 128GB (4x32GB) DDR4 2933 ECC UDIMM CL21 1.2V 2Rx8 memory upgrade

SKU CH-N6T9-5HY1G

128GB kit of four 32GB DDR4 2933 ECC UDIMM modules at CL21 and 1.2V, validated for Supermicro X12SCZ-F and X12SCZ-TLN4F motherboards

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes

Size 128GB 4X32GB

  • 128 GB total capacity from four 32 GB modules
  • DDR4 2933 speed rated at PC4-23400 for rated throughput
  • ECC function detects and corrects single-bit errors on the fly
  • Unbuffered 288-pin UDIMM form factor matches Supermicro X12SCZ-F / TLN4F requirements
  • CL21 latency at 1.2 V for stable operation within spec

System-specific ECC upgrade

This 128 GB kit contains four 32 GB DDR4 2933 modules built for Supermicro X12SCZ-F and X12SCZ-TLN4F motherboards. The unbuffered ECC UDIMM format matches the board's 288-pin slots and population rules. It is intended for servers and workstations that require error-correcting memory at the rated speed. Builders using consumer boards or registered DIMM platforms cannot use this kit.

Verified 2Rx8 rank and 1.2 V operation

The memory controller expects a 2Rx8 organisation at 1.20 V with CL21 timing; this kit meets those exact electrical parameters. Correct rank structure and voltage ensure the system recognises the full 128 GB capacity and runs at PC4-23400 without down-clocking. Modules with different rank counts or voltages will not post or will operate at reduced performance.

Passive thermals and standard DDR4 power

Without a heat spreader the modules rely on chassis airflow, which is typical for 1.2 V DDR4 UDIMMs in server enclosures. Power draw stays within the standard DDR4 envelope for this voltage and density. Acoustic impact is zero because no active cooling is present. Environments with restricted airflow should verify case cooling capacity before installation.

特長

  • 128 GB total capacity from four 32 GB modules
  • DDR4 2933 speed rated at PC4-23400 for rated throughput
  • ECC function detects and corrects single-bit errors on the fly
  • Unbuffered 288-pin UDIMM form factor matches Supermicro X12SCZ-F / TLN4F requirements
  • CL21 latency at 1.2 V for stable operation within spec

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered UDIMM Memory
Part NumberME23400-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR4 2933MHz PC4-23400 2Rx8 1.2V 288-PIN ECC UDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will 2933 MT/s DDR4 actually run at 2933 MT/s on a Supermicro X12SCZ-F?

Yes — the kit is spec-matched to the board's memory controller, so the 2933 MT/s rating is recognised and sustained at full 128 GB capacity.

Does the PC4-23400 label limit bandwidth on this platform?

PC4-23400 is simply the JEDEC bandwidth designation for DDR4-2933; the modules deliver that throughput when the motherboard populates all four slots per its validated rules.

What physical clearance do the 288-pin UDIMMs need in the Supermicro chassis?

Standard 288-pin UDIMM height with no heat spreader, so they fit the regular DIMM sockets on the X12SCZ-F / X12SCZ-TLN4F without interfering with CPU coolers or airflow guides.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。