暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR4 ECC UDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 128GB (4 x 32GB) DDR4 2933MHz ECC UDIMM memory upgrade

SKU CH-KASY-Y18ZX

128 GB DDR4-2933 ECC UDIMM kit (4 × 32 GB, CL21, 1.2 V, 2Rx8) validated for Supermicro X12SAE and X12SCA-F motherboards

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes

Size 128GB 4X32GB

  • 128 GB kit lets workstations handle large datasets
  • ECC protection corrects single-bit errors automatically
  • DDR4 2933 MHz matches Supermicro X12SAE and X12SCA-F specs
  • Unbuffered 288-pin UDIMM installs directly in motherboard slots
  • 2 V CL21 2Rx8 modules run at rated speed without tuning

Exact-fit DDR4 ECC kit for Supermicro

This 128 GB kit provides four 32 GB DDR4 2933 MHz ECC unbuffered UDIMMs built to the precise rank, voltage and timing the Supermicro X12SAE and X12SCA-F motherboards expect. It is aimed at administrators and workstation builders who need verified, full-capacity operation on those specific platforms without manual tuning.

Thermals and power draw

Each module runs at 1.2 V with no heat spreader, so power draw stays low and thermal output is minimal under normal server or workstation loads. Passive cooling in a chassis with adequate airflow is sufficient; the sticks add no audible noise because they have no moving parts.

288-pin unbuffered ECC UDIMM form factor

The kit uses the 288-pin unbuffered ECC UDIMM layout required by the target Supermicro boards; RDIMM or SODIMM modules will not fit or function. Buyers whose systems demand registered DIMMs or a different pin count should look elsewhere.

特長

  • 128 GB kit lets workstations handle large datasets
  • ECC protection corrects single-bit errors automatically
  • DDR4 2933 MHz matches Supermicro X12SAE and X12SCA-F specs
  • Unbuffered 288-pin UDIMM installs directly in motherboard slots
  • 2 V CL21 2Rx8 modules run at rated speed without tuning

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered UDIMM Memory
Part NumberME23400-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR4 2933MHz PC4-23400 2Rx8 1.2V 288-PIN ECC UDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install the 288-pin DDR4 ECC UDIMM modules in the correct population order on my Supermicro X12SAE motherboard?

Power down, open the chassis, consult the motherboard manual for the approved DIMM sequence, then press each 288-pin UDIMM firmly into its slot until the retention clips click — skipping the manual's population order is the step most often missed and can prevent full 128GB recognition.

What maintenance or replacement will the 1.20V Samsung, Micron or Hynix DRAM chips need during their service life?

No routine maintenance is required for the DRAM chips; if a module fails it is replaced as a unit under the lifetime replacement warranty.

At what point does the CL21 latency limit sustained throughput on this 2933MHz kit?

CL21 sets the minimum row-access delay, so under continuous heavy workloads the CAS latency becomes the first timing bottleneck before bandwidth or voltage limits are reached.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。