Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Two green DDR5 RDIMM modules, no heat spreaders, 288-pin edge connectors, 192GB kit

NEMIX RAM

NEMIX RAM 192GB (2 x 96GB) DDR5 4800 CL40 ECC Registered RDIMM memory upgrade for Supermicro H14SST-G

SKU CH-172V-BP8K6

192 GB DDR5-4800 ECC Registered RDIMM kit (2 × 96 GB, CL40, 1.1 V) validated for Supermicro H14SST-G motherboards

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

Voir les 30 autres configurations
  • 192 GB total capacity from two 96 GB modules
  • DDR5 4800 speed with CL40 latency for rated performance
  • Registered ECC design prevents data corruption under load
  • 2Rx4 organisation matches Supermicro H14SST-G population rules
  • 1 V operation meets server power-efficiency requirements

192 GB DDR5 ECC RDIMM kit for Supermicro H14SST-G

This 192 GB kit contains two 96 GB DDR5 4800 registered ECC RDIMMs built to the exact rank, voltage and timing the Supermicro H14SST-G motherboard expects. It targets administrators who need maximum registered capacity in a validated two-module configuration for production servers.

Thermals and power in normal use

Each module operates at 1.1 V without a heat spreader, relying on the server chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller so all slots can run fully populated at rated speed, while ECC corrects single-bit errors to prevent silent data corruption.

The specification that decides fit

The motherboard requires 288-pin DDR5 RDIMMs; UDIMM or SODIMM modules will not fit or function. Verify your system manual for supported capacities and approved population order before installation.

Points forts

  • 192 GB total capacity from two 96 GB modules
  • DDR5 4800 speed with CL40 latency for rated performance
  • Registered ECC design prevents data corruption under load
  • 2Rx4 organisation matches Supermicro H14SST-G population rules
  • 1 V operation meets server power-efficiency requirements

Caractéristiques

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Autres versions de ce modèle

5 de plus dans cette gamme

Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.

Questions sur cet article

How do I install the 288-pin DDR5 RDIMM modules in the Supermicro H14SST-G and which slot order do people often get wrong?

Power down the server, open the chassis, and insert each 96GB module into the DIMM slots following the population sequence shown in the Supermicro H14SST-G manual; the most common mistake is skipping the prescribed order, which prevents the 192GB kit from being recognised at full capacity.

What maintenance or replacement will the 2Rx4 Registered ECC RDIMM kit need during its service life?

The modules have no moving parts or heat spreaders, so no routine maintenance is required; if a single-bit error exceeds ECC correction or a module fails, replace the affected 96GB stick — the kit is covered by a lifetime replacement warranty.

What is the first limit that appears when the 192GB DDR5-4800 CL40 kit runs sustained workloads on the H14SST-G?

The memory controller is locked to 4800 MT/s at 1.1 V with CL40 latency, so sustained throughput cannot exceed the rated PC5-38400 bandwidth; thermal throttling is unlikely without a heat spreader, but the speed ceiling is the primary bottleneck.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.