eshinreal
eshinreal 4 Port Mini PCIe to SATA 3 Expansion Card
- Controller Card
25,99 $US
0.00033339BTC
En stock
NEMIX RAM
NEMIX RAM 64GB 4x16GB DDR5 6400 CL52 ECC RDIMM 288-Pin Supermicro AS-2116GT-HNTF
64 GB registered ECC DDR5 kit with four 16 GB modules running at 6400 MHz CL52 for Supermicro GrandTwin A+ AS-2116GT-HNTF servers
- Capacity64GB (4 x 16GB)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- Compatible SystemSupermicro
- 64 GB kit expands server capacity with four 16 GB modules
- ECC RDIMM design detects and corrects data errors for reliability
- DDR5 6400 CL52 timing delivers high throughput at low latency
- 10 V operation reduces power draw per module
- Validated for Supermicro GrandTwin AS-2116GT-HNTF systems
Purpose-built server memory kit
This NEMIX RAM kit supplies 64GB of DDR5 registered ECC memory in a matched four-module set. Each 16GB module runs at 6400MHz with CL52 latency and 1.10V operation. The kit is validated for the Supermicro GrandTwin A+ Server AS-2116GT-HNTF.
Thermals and power profile
Registered DDR5 modules at 1.10V draw modest power under typical server workloads. The absence of heat spreaders means airflow across the 288-pin RDIMM slots handles cooling. CL52 timing at 6400MHz keeps electrical load predictable for the platform’s memory controller.
What the kit changes
Installing four 1Rx8 modules populates all channels for maximum bandwidth on the target platform. ECC and registered signalling protect data integrity in multi-socket or virtualisation deployments. Buyers needing higher density per slot or non-registered memory for workstation boards cannot use this kit.
Points forts
- 64 GB kit expands server capacity with four 16 GB modules
- ECC RDIMM design detects and corrects data errors for reliability
- DDR5 6400 CL52 timing delivers high throughput at low latency
- 10 V operation reduces power draw per module
- Validated for Supermicro GrandTwin AS-2116GT-HNTF systems
Caractéristiques
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K4 |
| Capacity | 64GB (4 x 16GB) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL52 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 1Rx8 |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 64GB (4 x 16GB) DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Questions sur cet article
How do I install the four 16 GB DDR5 RDIMMs in the Supermicro AS-2116GT-HNTF and what step is often missed?
Power down the server, open the chassis, align each 288-pin module with the correct DIMM slot per the motherboard manual, press firmly until both retention clips click, then verify in BIOS that all 64 GB are detected at 6400 MHz with ECC active.
What maintenance or replacement will the 1Rx8 ECC RDIMM kit need over its service life?
The modules have no heat spreaders and no moving parts, so no routine maintenance is required; if a module fails, replace the faulty 16 GB stick with an identical DDR5 6400 CL52 1.10 V ECC RDIMM to keep the quad-channel set matched.
What limit appears first when the kit runs sustained workloads at 6400 MHz?
The DDR5 6400 CL52 timing at 1.10 V is the primary constraint; sustained heavy traffic will hit CAS latency 52 and the registered buffer before thermal or power limits become an issue.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
SMUGDESK
SMUGDESK PCIe USB 3.2 Gen 2 Card 10Gbps Type A Type C Type E 19/20Pin
32,99 $US
0.00042318BTC
En stock
Vszerda
Vszerda UC-087-4P 4-port PCIe x1 to 2 USB 3.0 and 2 USB-C expansion card
23,99 $US
0.00030773BTC
En stock
Vszerda
Vszerda UC-087-2P 2 Port PCIe x1 to USB-C Expansion Card with 80/120mm Bracket
21,99 $US
0.00028208BTC
En stock