Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Square black 30mm maglev fan with two wires

OEM Industries

OEM Industries KD0503PEV1-8 30mm Maglev fan 5V .9W 2-pin

SKU CH-XM9K-8MH3D

A 30 mm square maglev fan running at 5 V and .9 W with a 2-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size30mm
  • Bearing TypeMaglev
  • Power Connector2 Pin
  • LEDNo
  • Maglev bearing reduces friction for quieter operation
  • 30 mm square frame fits tight CPU cooler spaces
  • 5 V .9 W draw keeps power use low
  • 2-pin connector simplifies motherboard installation
  • No LED lighting avoids unwanted case glow

Compact 30 mm Maglev Fan

The OEM Industries KD0503PEV1-8 is a 30 mm square cooling fan built for tight spaces in small-form-factor PCs or embedded systems. It uses a maglev bearing and a two-pin 5 V connection for simple speed control.

5 V .9 W Power Rating

This fan draws .9 W at 5 V, making it the key figure to match against your board header or controller budget. Exceeding the available current will prevent the fan from spinning up reliably.

Low-Noise Maglev Operation

The maglev bearing reduces friction so the fan runs quietly at typical speeds with minimal vibration. Power draw stays at .9 W under normal load, keeping thermal contribution inside the chassis very low.

Points forts

  • Maglev bearing reduces friction for quieter operation
  • 30 mm square frame fits tight CPU cooler spaces
  • 5 V .9 W draw keeps power use low
  • 2-pin connector simplifies motherboard installation
  • No LED lighting avoids unwanted case glow

Caractéristiques

ModelKD0503PEV1-8
ColorBlack
TypeFan only
Fan Size30mm
Bearing TypeMaglev
Power Connector2 Pin
LEDNo

Questions sur cet article

How much power does the 5 V 0.9 W rating actually draw from a motherboard header?

The fan is rated at 0.9 W on a 5 V supply, so it draws very little current from a standard 5 V fan header.

What does the 2‑pin connector mean for speed control on this 30 mm maglev fan?

A 2‑pin connector provides power only; speed is fixed at the voltage supplied and cannot be PWM‑controlled by the board.

Will the 30 mm square frame with 6 mm thickness fit in the tight clearance above a low‑profile CPU cooler?

The fan measures 30 mm square and 6 mm thick, so it fits in very narrow spaces where larger fans cannot.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.