We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black 30mm maglev fan with two wires

OEM Industries

OEM Industries KD0503PEV1-8 30mm Maglev fan 5V .9W 2-pin

SKU CH-XM9K-8MH3D

A 30 mm square maglev fan running at 5 V and .9 W with a 2-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size30mm
  • Bearing TypeMaglev
  • Power Connector2 Pin
  • LEDNo
  • Maglev bearing reduces friction for quieter operation
  • 30 mm square frame fits tight CPU cooler spaces
  • 5 V .9 W draw keeps power use low
  • 2-pin connector simplifies motherboard installation
  • No LED lighting avoids unwanted case glow

Compact 30 mm Maglev Fan

The OEM Industries KD0503PEV1-8 is a 30 mm square cooling fan built for tight spaces in small-form-factor PCs or embedded systems. It uses a maglev bearing and a two-pin 5 V connection for simple speed control.

5 V .9 W Power Rating

This fan draws .9 W at 5 V, making it the key figure to match against your board header or controller budget. Exceeding the available current will prevent the fan from spinning up reliably.

Low-Noise Maglev Operation

The maglev bearing reduces friction so the fan runs quietly at typical speeds with minimal vibration. Power draw stays at .9 W under normal load, keeping thermal contribution inside the chassis very low.

Highlights

  • Maglev bearing reduces friction for quieter operation
  • 30 mm square frame fits tight CPU cooler spaces
  • 5 V .9 W draw keeps power use low
  • 2-pin connector simplifies motherboard installation
  • No LED lighting avoids unwanted case glow

Specifications

ModelKD0503PEV1-8
ColorBlack
TypeFan only
Fan Size30mm
Bearing TypeMaglev
Power Connector2 Pin
LEDNo

Questions about this item

How much power does the 5 V 0.9 W rating actually draw from a motherboard header?

The fan is rated at 0.9 W on a 5 V supply, so it draws very little current from a standard 5 V fan header.

What does the 2‑pin connector mean for speed control on this 30 mm maglev fan?

A 2‑pin connector provides power only; speed is fixed at the voltage supplied and cannot be PWM‑controlled by the board.

Will the 30 mm square frame with 6 mm thickness fit in the tight clearance above a low‑profile CPU cooler?

The fan measures 30 mm square and 6 mm thick, so it fits in very narrow spaces where larger fans cannot.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.