Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Square black 30mm maglev fan with two wires

OEM Industries

OEM Industries KD0503PEV1-8 30mm Maglev fan 5V .9W 2-pin

SKU CH-XM9K-8MH3D

A 30 mm square maglev fan running at 5 V and .9 W with a 2-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size30mm
  • Bearing TypeMaglev
  • Power Connector2 Pin
  • LEDNo
  • Maglev bearing reduces friction for quieter operation
  • 30 mm square frame fits tight CPU cooler spaces
  • 5 V .9 W draw keeps power use low
  • 2-pin connector simplifies motherboard installation
  • No LED lighting avoids unwanted case glow

Compact 30 mm Maglev Fan

The OEM Industries KD0503PEV1-8 is a 30 mm square cooling fan built for tight spaces in small-form-factor PCs or embedded systems. It uses a maglev bearing and a two-pin 5 V connection for simple speed control.

5 V .9 W Power Rating

This fan draws .9 W at 5 V, making it the key figure to match against your board header or controller budget. Exceeding the available current will prevent the fan from spinning up reliably.

Low-Noise Maglev Operation

The maglev bearing reduces friction so the fan runs quietly at typical speeds with minimal vibration. Power draw stays at .9 W under normal load, keeping thermal contribution inside the chassis very low.

Pluspunten

  • Maglev bearing reduces friction for quieter operation
  • 30 mm square frame fits tight CPU cooler spaces
  • 5 V .9 W draw keeps power use low
  • 2-pin connector simplifies motherboard installation
  • No LED lighting avoids unwanted case glow

Specificaties

ModelKD0503PEV1-8
ColorBlack
TypeFan only
Fan Size30mm
Bearing TypeMaglev
Power Connector2 Pin
LEDNo

Vragen over dit artikel

How much power does the 5 V 0.9 W rating actually draw from a motherboard header?

The fan is rated at 0.9 W on a 5 V supply, so it draws very little current from a standard 5 V fan header.

What does the 2‑pin connector mean for speed control on this 30 mm maglev fan?

A 2‑pin connector provides power only; speed is fixed at the voltage supplied and cannot be PWM‑controlled by the board.

Will the 30 mm square frame with 6 mm thickness fit in the tight clearance above a low‑profile CPU cooler?

The fan measures 30 mm square and 6 mm thick, so it fits in very narrow spaces where larger fans cannot.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.