Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter

OWC

OWC 32GB (2x16GB) DDR3-1333 ECC Reg RDIMM HP Z800

SKU CH-C477-6EPPA

32 GB DDR3-1333 ECC registered RDIMM kit (2 × 16 GB) validated for HP Workstation Z800

  • Capacity32GB (2 x 16GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 32GB (2 x 16GB)

  • ECC registered design protects data integrity in workstation workloads
  • 32 GB kit (2 × 16 GB modules) expands memory capacity for HP Z800
  • DDR3-1333 PC3-10600 CL9 at 1.5 V matches system specifications
  • 240-pin registered RDIMM form factor fits Z800 DIMM slots exactly
  • JEDEC and RoHS compliant for warranty-safe upgrade confidence

System-Specific ECC Kit

This 32 GB kit contains two 16 GB DDR3-1333 registered DIMMs built for the HP Workstation Z800. ECC error correction and registered buffering make it suitable for workstation and server workloads that require data integrity. It is not compatible with standard desktop motherboards or unbuffered memory configurations.

Registered ECC Requirement

The modules are 240-pin DDR3 RDIMMs with CL9 latency at 1.5 V, organised as dual-rank 2Rx4 parts. Your Z800 must support registered ECC memory; mixing these with unbuffered DIMMs will prevent the system from booting. Verify the workstation manual before installation.

Thermal and Power Profile

Operating at the standard 1.5 V DDR3 voltage, the sticks draw typical registered-DIMM power without a heat spreader. In a properly ventilated Z800 chassis they run at normal DDR3 thermals and produce no audible noise. The kit adds 32 GB of capacity within the platform’s original power envelope.

Points forts

  • ECC registered design protects data integrity in workstation workloads
  • 32 GB kit (2 × 16 GB modules) expands memory capacity for HP Z800
  • DDR3-1333 PC3-10600 CL9 at 1.5 V matches system specifications
  • 240-pin registered RDIMM form factor fits Z800 DIMM slots exactly
  • JEDEC and RoHS compliant for warranty-safe upgrade confidence

Caractéristiques

BrandOWC
Part Number1R3D32R4032P
Capacity32GB (2 x 16GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemHP Workstation Z800

Autres versions de ce modèle

5 de plus dans cette gamme

Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.

Questions sur cet article

Will the 1333 MHz speed run at full rate in a Z800?

Yes, the DDR3 1333 modules match the Z800 native memory bus and will operate at their rated 1333 MHz without down-clocking.

Does the 240-pin registered ECC design limit mixing with other memory?

These are 240-pin DDR3 ECC registered DIMMs; they cannot be mixed with unbuffered or non-ECC modules and require a workstation or server platform that supports registered memory.

What physical clearance do the 16 GB sticks need inside the Z800?

Each 16 GB module is a standard-height 240-pin DDR3 RDIMM with no heat spreader, so it fits the Z800 DIMM slots without extra clearance.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.