Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Four green DDR3 ECC registered DIMMs in anti-static tray

OWC

OWC 32GB (4x8GB) DDR3 1333 PC3-10600 CL9 2Rx4 240-pin 1.5V ECC Registered RDIMM memory upgrade

SKU CH-1XQ5-QTZB2

32 GB DDR3 1333 ECC registered RDIMM kit of four 8 GB modules for HP ProLiant DL160 G6, DL165 G7, DL170e G6, DL170h G6 and DL180 G6 servers

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • ECC registered design protects data integrity in server workloads
  • 32 GB kit (4 × 8 GB) expands memory capacity for virtualisation
  • DDR3 1333 PC3-10600 CL9 matches HP ProLiant G6/G7 specifications
  • 5 V 240-pin RDIMM drops into DL160 G6 DL165 G7 DL170e G6 DL170h G6 DL180 G6
  • Replaces HP part numbers 500205071 500205171 500206071 500662B21 501536001 593913B21 A0R56A FX622AA FX622UT

OWC 32GB DDR3 ECC RDIMM kit

This 32GB kit contains four 8GB DDR3 1333 PC3-10600 CL9 registered ECC modules built for HP ProLiant DL160 G6, DL165 G7, DL170e G6, DL170h G6 and DL180 G6 servers. Each 240-pin DIMM runs at 1.5V with a 2Rx4 organisation and no heat spreader. The kit replaces HP part numbers 500205071, 500205171, 500206071, 500662B21, 501536001, 593913B21, A0R56A, FX622AA and FX622UT.

Sustained-load behaviour

Registered ECC modules add a clock cycle of buffering and single-bit error correction, so data integrity is maintained during continuous workloads such as virtualisation or database serving. The CL9 latency at 1333 MT/s delivers predictable throughput without the timing variance seen in unbuffered consumer DIMMs. All four sticks are tested together to ensure matched performance across every channel.

Pre-installation checks

Verify that your server model is one of the five ProLiant generations listed above and that the memory slots accept 240-pin registered ECC RDIMMs. This memory will not work in standard desktop boards and cannot be mixed with unbuffered modules. Confirm the system BIOS is current enough to recognise 8GB registered ranks before ordering.

Points forts

  • ECC registered design protects data integrity in server workloads
  • 32 GB kit (4 × 8 GB) expands memory capacity for virtualisation
  • DDR3 1333 PC3-10600 CL9 matches HP ProLiant G6/G7 specifications
  • 5 V 240-pin RDIMM drops into DL160 G6 DL165 G7 DL170e G6 DL170h G6 DL180 G6
  • Replaces HP part numbers 500205071 500205171 500206071 500662B21 501536001 593913B21 A0R56A FX622AA FX622UT

Caractéristiques

BrandOWC
Part Number1R3D32R4032S
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemHP ProLiant DL160 G6
HP ProLiant DL165 G7
HP ProLiant DL170e G6
HP ProLiant DL170h G6
HP ProLiant DL180 G6

Autres versions de ce modèle

5 de plus dans cette gamme

Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.

Questions sur cet article

How much power does the 1.5 V DDR3 1333 kit draw under full load?

Each module runs at the standard 1.5 V JEDEC voltage for DDR3 1333. Total system draw depends on the server's memory controller and how many DIMM slots are populated.

What server hardware is required to use this ECC registered memory?

The kit is validated for HP ProLiant DL160 G6, DL165 G7, DL170e G6, DL170h G6 and DL180 G6. The motherboard must support DDR3 ECC registered DIMMs; unbuffered memory cannot be mixed with these modules.

Can the 2Rx4 registered DIMMs share channels with older unbuffered DDR3 sticks?

No. The manufacturer highlights state that ECC registered memory cannot be mixed with unbuffered memory. All populated slots should use matching registered modules for stable operation.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.