Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Four green DDR3 ECC registered DIMMs in anti-static tray

OWC

OWC 32GB (4x8GB) DDR3 1333 PC3-10600 CL9 2Rx4 240-pin 1.5V ECC Registered RDIMM memory upgrade

SKU CH-1XQ5-QTZB2

32 GB DDR3 1333 ECC registered RDIMM kit of four 8 GB modules for HP ProLiant DL160 G6, DL165 G7, DL170e G6, DL170h G6 and DL180 G6 servers

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • ECC registered design protects data integrity in server workloads
  • 32 GB kit (4 × 8 GB) expands memory capacity for virtualisation
  • DDR3 1333 PC3-10600 CL9 matches HP ProLiant G6/G7 specifications
  • 5 V 240-pin RDIMM drops into DL160 G6 DL165 G7 DL170e G6 DL170h G6 DL180 G6
  • Replaces HP part numbers 500205071 500205171 500206071 500662B21 501536001 593913B21 A0R56A FX622AA FX622UT

OWC 32GB DDR3 ECC RDIMM kit

This 32GB kit contains four 8GB DDR3 1333 PC3-10600 CL9 registered ECC modules built for HP ProLiant DL160 G6, DL165 G7, DL170e G6, DL170h G6 and DL180 G6 servers. Each 240-pin DIMM runs at 1.5V with a 2Rx4 organisation and no heat spreader. The kit replaces HP part numbers 500205071, 500205171, 500206071, 500662B21, 501536001, 593913B21, A0R56A, FX622AA and FX622UT.

Sustained-load behaviour

Registered ECC modules add a clock cycle of buffering and single-bit error correction, so data integrity is maintained during continuous workloads such as virtualisation or database serving. The CL9 latency at 1333 MT/s delivers predictable throughput without the timing variance seen in unbuffered consumer DIMMs. All four sticks are tested together to ensure matched performance across every channel.

Pre-installation checks

Verify that your server model is one of the five ProLiant generations listed above and that the memory slots accept 240-pin registered ECC RDIMMs. This memory will not work in standard desktop boards and cannot be mixed with unbuffered modules. Confirm the system BIOS is current enough to recognise 8GB registered ranks before ordering.

Puntos fuertes

  • ECC registered design protects data integrity in server workloads
  • 32 GB kit (4 × 8 GB) expands memory capacity for virtualisation
  • DDR3 1333 PC3-10600 CL9 matches HP ProLiant G6/G7 specifications
  • 5 V 240-pin RDIMM drops into DL160 G6 DL165 G7 DL170e G6 DL170h G6 DL180 G6
  • Replaces HP part numbers 500205071 500205171 500206071 500662B21 501536001 593913B21 A0R56A FX622AA FX622UT

Especificaciones

BrandOWC
Part Number1R3D32R4032S
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemHP ProLiant DL160 G6
HP ProLiant DL165 G7
HP ProLiant DL170e G6
HP ProLiant DL170h G6
HP ProLiant DL180 G6

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

How much power does the 1.5 V DDR3 1333 kit draw under full load?

Each module runs at the standard 1.5 V JEDEC voltage for DDR3 1333. Total system draw depends on the server's memory controller and how many DIMM slots are populated.

What server hardware is required to use this ECC registered memory?

The kit is validated for HP ProLiant DL160 G6, DL165 G7, DL170e G6, DL170h G6 and DL180 G6. The motherboard must support DDR3 ECC registered DIMMs; unbuffered memory cannot be mixed with these modules.

Can the 2Rx4 registered DIMMs share channels with older unbuffered DDR3 sticks?

No. The manufacturer highlights state that ECC registered memory cannot be mixed with unbuffered memory. All populated slots should use matching registered modules for stable operation.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.