Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Black 50mm sleeve-bearing cooling fan with two-wire 12V .14A connector

SunnyStar Co., Ltd

SunnyStar Co., Ltd RDM5015S 50mm 12V .14A Sleeve Bearing Fan

SKU CH-H5ED-D2NAV

A 50 mm sleeve-bearing fan running at 12 V and .14 A for charger or inverter cooling

  • ColorBlack
  • TypeFan only
  • Fan Size50mm
  • Bearing TypeSleeve Bearing
  • Power Connector2 Pin
  • LEDNo
  • 50 mm compact frame fits tight chassis spaces
  • 12 V .14 A draw keeps power use low
  • sleeve bearing runs quietly at modest speeds
  • two-pin connector enables simple plug-in installation
  • suits charger and inverter cooling duties

50 mm 12 V sleeve-bearing fan

This 50 mm cooling fan runs on 12 V and draws .14 A through a two-pin connector. It uses a sleeve bearing and has no LED lighting. The unit is sold as a fan only in black.

Suits tight 50 mm mounts and 12 V DC circuits

Builders who need a larger frame, a three- or four-pin PWM header, ball-bearing longevity or RGB illumination should look elsewhere. The two-wire design also rules out speed reporting or motherboard fan curves.

50 mm frame decides fit

The 50 mm square footprint is the single dimension that determines whether this fan will screw into your charger, inverter or compact cooler. Verify the mounting holes match before ordering.

Points forts

  • 50 mm compact frame fits tight chassis spaces
  • 12 V .14 A draw keeps power use low
  • sleeve bearing runs quietly at modest speeds
  • two-pin connector enables simple plug-in installation
  • suits charger and inverter cooling duties

Caractéristiques

ModelRDM5015S
ColorBlack
TypeFan only
Fan Size50mm
Bearing TypeSleeve Bearing
Power Connector2 Pin
LEDNo

Questions sur cet article

How do I install the 50 mm sleeve-bearing fan with its 2-pin connector?

Align the 50 mm frame with the mounting holes, secure it with four screws, then plug the 2-pin connector into a 12 V header; the step often missed is checking that the red wire goes to the positive pin.

What maintenance will the RDM5015S sleeve bearing need later?

Sleeve bearings cannot be relubricated easily; when noise or vibration appears after extended running, the usual remedy is to replace the entire 5015s fan.

What limit appears first when the 12 V .14 A fan runs continuously?

The sleeve bearing’s lubricant degrades with constant heat, so bearing wear and rising noise typically become the first limiting factor under sustained operation.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.