Tripp Lite
Tripp Lite PDUMNH15 Monitored 1U PDU 120V 15A 8x 5-15R
- Monitored
- 1U
328,99 $US
0.00419705BTC
En stock
SXDOOL
SXDOOL MF5015VX-B00C-A99 50x15mm 12V 2.04W 6000RPM 42.2dBA Maglev case fan
A 50 mm by 15 mm maglev blower spins at 6000 RPM from a 12 V supply while producing 42.2 dBA of noise
- TypeCase Fan Accessory
- CompatibilityMF50151VX-B00C-G99
- Fan Size50mm
- Bearing TypeMaglev
- Power Connector3 lead wires
- ColorBlack
- Maglev bearing reduces friction for longer life
- 6000 RPM delivers strong airflow in tight spaces
- 2 dBA keeps noise low at full speed
- 04 W draw limits power-supply load
- 58 mm hole pitch fits standard 50 mm mounts
Compact 50 mm Maglev blower
The SXDOOL MF5015VX-B00C-A99 is a 50 mm square, 15 mm thick blower fan that runs on 12 V DC and draws 2.04 W. Its magnetic suspension bearing spins at 6000 RPM with a 10 % tolerance and produces 42.2 dBA of noise. The unit weighs 30 g and carries UL, CSA, TUV and CE safety approvals.
Ideal for tight enclosures needing directed airflow
Builders fitting narrow rack units, small-form-factor cases or appliance chassis where a 50 mm mounting pattern and 58 mm hole pitch are required will find this fan suitable. It is not suited for systems that need larger diameter fans, higher static pressure from bigger blades, or PWM speed control via a four-pin header.
3-wire lead with fixed 12 V supply
The fan connects through three lead wires without a standard motherboard connector, so it requires a 12 V source that can provide 0.17 A. No plug is included, and the wiring does not carry a PWM signal for automatic speed regulation.
Points forts
- Maglev bearing reduces friction for longer life
- 6000 RPM delivers strong airflow in tight spaces
- 2 dBA keeps noise low at full speed
- 04 W draw limits power-supply load
- 58 mm hole pitch fits standard 50 mm mounts
Caractéristiques
| Brand | SUNON |
|---|---|
| Series | MF50151VX |
| Model | MF50151VX-B00C-G99 |
| Type | Case Fan Accessory |
| Compatibility | MF50151VX-B00C-G99 |
| Fan Size | 50mm |
| Bearing Type | Maglev |
| Power Connector | 3 lead wires |
| Color | Black |
| LED | No |
| Dimensions | 50mm x 15mm |
| Package Contents | 1x fan |
Questions sur cet article
How loud is 42.2 dBA when the fan is running at 6000 RPM inside a case?
At 42.2 dBA the fan is audible but not dominant in a typical build; it sits between a quiet library and a normal conversation level.
What does the three-wire lead provide compared with a two-wire version?
The third wire carries a tachometer signal so the motherboard or controller can monitor the actual 6000 RPM speed.
Will the 58 mm hole pitch line up with standard 50 mm fan mounts?
No — the mounting holes are spaced 58 mm apart, so you need a bracket or panel cut for that pitch rather than the usual 50 mm spacing.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
