Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Black 50 by 15 mm maglev blower fan with three lead wires

SXDOOL

SXDOOL MF5015VX-B00C-A99 50x15mm 12V 2.04W 6000RPM 42.2dBA Maglev case fan

SKU CH-HQVH-Z729K MPN MF5015VX-B00C-A99

A 50 mm by 15 mm maglev blower spins at 6000 RPM from a 12 V supply while producing 42.2 dBA of noise

  • TypeCase Fan Accessory
  • CompatibilityMF50151VX-B00C-G99
  • Fan Size50mm
  • Bearing TypeMaglev
  • Power Connector3 lead wires
  • ColorBlack
  • Maglev bearing reduces friction for longer life
  • 6000 RPM delivers strong airflow in tight spaces
  • 2 dBA keeps noise low at full speed
  • 04 W draw limits power-supply load
  • 58 mm hole pitch fits standard 50 mm mounts

Compact 50 mm Maglev blower

The SXDOOL MF5015VX-B00C-A99 is a 50 mm square, 15 mm thick blower fan that runs on 12 V DC and draws 2.04 W. Its magnetic suspension bearing spins at 6000 RPM with a 10 % tolerance and produces 42.2 dBA of noise. The unit weighs 30 g and carries UL, CSA, TUV and CE safety approvals.

Ideal for tight enclosures needing directed airflow

Builders fitting narrow rack units, small-form-factor cases or appliance chassis where a 50 mm mounting pattern and 58 mm hole pitch are required will find this fan suitable. It is not suited for systems that need larger diameter fans, higher static pressure from bigger blades, or PWM speed control via a four-pin header.

3-wire lead with fixed 12 V supply

The fan connects through three lead wires without a standard motherboard connector, so it requires a 12 V source that can provide 0.17 A. No plug is included, and the wiring does not carry a PWM signal for automatic speed regulation.

Pontos fortes

  • Maglev bearing reduces friction for longer life
  • 6000 RPM delivers strong airflow in tight spaces
  • 2 dBA keeps noise low at full speed
  • 04 W draw limits power-supply load
  • 58 mm hole pitch fits standard 50 mm mounts

Especificações

BrandSUNON
SeriesMF50151VX
ModelMF50151VX-B00C-G99
TypeCase Fan Accessory
CompatibilityMF50151VX-B00C-G99
Fan Size50mm
Bearing TypeMaglev
Power Connector3 lead wires
ColorBlack
LEDNo
Dimensions50mm x 15mm
Package Contents1x fan

Perguntas sobre este artigo

How loud is 42.2 dBA when the fan is running at 6000 RPM inside a case?

At 42.2 dBA the fan is audible but not dominant in a typical build; it sits between a quiet library and a normal conversation level.

What does the three-wire lead provide compared with a two-wire version?

The third wire carries a tachometer signal so the motherboard or controller can monitor the actual 6000 RPM speed.

Will the 58 mm hole pitch line up with standard 50 mm fan mounts?

No — the mounting holes are spaced 58 mm apart, so you need a bracket or panel cut for that pitch rather than the usual 50 mm spacing.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.