Thermaltake
Thermaltake PS-TR2-0500NPCGUS-G 500W power supply
Delivers 500 W continuous power with 80 PLUS Gold efficiency and a 120 mm fan running at 1500 RPM
- TypeATX12V / EPS12V
- Maximum Power500 W
- Fans120mm Fan: 1500 R.P.M. ± 10%
- PFCActive
- PCI-Express Connector2 x 6+2-Pin
- SLIYes
- 80 PLUS Gold certification delivers 87-92% efficiency at 20-100% load
- Active PFC maintains stable power across 100-240 V input range
- Single +12V rail design provides continuous 500 W output for demanding builds
- 120 mm fan runs at 1500 RPM with intelligent speed control for quiet cooling
- 2 x 6+2-pin PCI-Express connectors support SLI and CrossFire multi-GPU configurations
Product identity
Thermaltake TR2 Gold 500W is an ATX12V / EPS12V power supply delivering 500 W maximum output. It carries 80 PLUS Gold certification with 87 to 92 percent efficiency across 20 to 100 percent load and uses Active PFC for 100 to 240 V input.
Who it suits and who it does not
Builders assembling a mainstream desktop with a single graphics card will find the two 6+2-pin PCIe connectors and SLI / CrossFire readiness adequate. Systems that require more than two PCIe power cables or a higher total wattage should look at a larger unit.
Deciding specification
The single +12 V rail design provides the full 500 W on one rail, which determines whether the supply can handle the combined load of CPU and GPU without splitting currents across multiple rails.
Points forts
- 80 PLUS Gold certification delivers 87-92% efficiency at 20-100% load
- Active PFC maintains stable power across 100-240 V input range
- Single +12V rail design provides continuous 500 W output for demanding builds
- 120 mm fan runs at 1500 RPM with intelligent speed control for quiet cooling
- 2 x 6+2-pin PCI-Express connectors support SLI and CrossFire multi-GPU configurations
Caractéristiques
| Brand | Thermaltake |
|---|---|
| Model | PS-TR2-0500NPCGUS-G |
| Type | ATX12V / EPS12V |
| Maximum Power | 500 W |
| Fans | 120mm Fan: 1500 R.P.M. ± 10% |
| PFC | Active |
| PCI-Express Connector | 2 x 6+2-Pin |
| SLI | Yes |
| Haswell Support | Ready |
| CrossFire | CrossFire Ready |
| Power Good Signal | 100-500ms |
| Hold-up Time | 16ms min.@115V/60Hz; 10ms min.@230V/50Hz |
| Efficiency | 87-92% efficiency @ 20-100% load |
| Energy-Efficient | 80 PLUS GOLD Certified |
| Input Voltage | 100 - 240 V |
| Input Frequency Range | 50/60 Hz |
| Input Current | 8A max |
| MTBF | >100,000 Hours |
| Approvals | CE/UL/CUL/FCC/TUV/GOST. |
| Dimensions | 3.39" x 5.91" x 5.51" |
| Poids d’expédition | 2.19 kg |
| Dimensions du colis | 236 × 180 × 107 mm |
Questions sur cet article
Will the 500W unit power a legacy Core 2 Quad build that still uses a 20-pin motherboard connector?
The main cable ends in a 20+4 pin plug that separates to fit older 20-pin sockets, and the 4+4 pin EPS connector splits for 4-pin CPU headers, so the supply works with that platform.
How can I confirm the 120mm fan is running at its rated 1500 RPM after installation?
The fan uses intelligent RPM control; you can verify speed in BIOS hardware monitor or with any fan-speed utility that reads the PSU fan header.
Does the box include SATA power cables or must they be purchased separately?
Six SATA connectors are pre-attached to the sleeved cables inside the box, so no extra SATA power cables are needed.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



