Zyvpee
Zyvpee ADN512MB-A90 135mm 2-pin ball-bearing case fan
135 mm ball-bearing case fan with 2-pin 12 V 0.27 A power for server or chassis cooling
- TypeCase Fan
- Fan Size135mm
- Bearing TypeBall
- Power Connector2 Pin
- ColorBlack
- LEDNon-LED
- 135 mm frame fits wide server mounts
- Ball bearing lasts longer than sleeve types
- 12 V 0.27 A draw keeps power use low
- Two-pin connector plugs straight into legacy headers
- Non-LED black design stays invisible inside the case
135 mm 2-Pin Ball-Bearing Fan
This 135 mm case fan uses a ball-bearing motor and a 2-pin power connector. It runs on 12 V and draws 0.27 A. The frame measures 135 mm square and 25 mm thick. It is suited to standard server or chassis cooling slots that accept this form factor.
Server Cooling Fit
The fan is designed for server square cooling applications where a 135 mm footprint is required. It suits builders who need a non-LED, 2-wire unit for direct 12 V operation. It is not suited to systems that demand PWM speed control or a 3-pin or 4-pin header. Buyers who want addressable lighting or variable speed profiles should look at something else.
2-Pin Connector Constraint
The single specification that decides fit is the 2-pin power connector. It delivers fixed 12 V power without a tachometer or PWM signal. Verify that the target chassis or motherboard provides a matching 2-pin header before purchasing.
Points forts
- 135 mm frame fits wide server mounts
- Ball bearing lasts longer than sleeve types
- 12 V 0.27 A draw keeps power use low
- Two-pin connector plugs straight into legacy headers
- Non-LED black design stays invisible inside the case
Caractéristiques
| Brand | 3ccooler.com |
|---|---|
| Series | ADN512MB-A90 |
| Model | ADN512MB-A90 |
| Type | Case Fan |
| Fan Size | 135mm |
| Bearing Type | Ball |
| Power Connector | 2 Pin |
| Color | Black |
| LED | Non-LED |
| Features | Power Cooling |
| Dimensions | 135*25mm |
Questions sur cet article
Does the 135 mm square frame with 25 mm depth fit my chassis mounting holes?
The fan measures 135 mm by 135 mm and is 25 mm thick, so it matches standard 135 mm square mounting patterns.
How do I connect the 2-pin 12 V 0.27 A power lead correctly?
Plug the 2-pin connector into a 12 V fan header; the keyed plug prevents reverse polarity.
When should I expect to replace the ball-bearing fan?
Ball bearings typically last several years of continuous use; replace when noise increases or airflow drops.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $US
0.0000105BTC
En stock