暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 135mm square case fan with ball bearing and two-pin connector

Zyvpee

Zyvpee ADN512MB-A90 135mm 2-pin ball-bearing case fan

SKU CH-GX1F-D9TNM

135 mm ball-bearing case fan with 2-pin 12 V 0.27 A power for server or chassis cooling

  • TypeCase Fan
  • Fan Size135mm
  • Bearing TypeBall
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • 135 mm frame fits wide server mounts
  • Ball bearing lasts longer than sleeve types
  • 12 V 0.27 A draw keeps power use low
  • Two-pin connector plugs straight into legacy headers
  • Non-LED black design stays invisible inside the case

135 mm 2-Pin Ball-Bearing Fan

This 135 mm case fan uses a ball-bearing motor and a 2-pin power connector. It runs on 12 V and draws 0.27 A. The frame measures 135 mm square and 25 mm thick. It is suited to standard server or chassis cooling slots that accept this form factor.

Server Cooling Fit

The fan is designed for server square cooling applications where a 135 mm footprint is required. It suits builders who need a non-LED, 2-wire unit for direct 12 V operation. It is not suited to systems that demand PWM speed control or a 3-pin or 4-pin header. Buyers who want addressable lighting or variable speed profiles should look at something else.

2-Pin Connector Constraint

The single specification that decides fit is the 2-pin power connector. It delivers fixed 12 V power without a tachometer or PWM signal. Verify that the target chassis or motherboard provides a matching 2-pin header before purchasing.

特長

  • 135 mm frame fits wide server mounts
  • Ball bearing lasts longer than sleeve types
  • 12 V 0.27 A draw keeps power use low
  • Two-pin connector plugs straight into legacy headers
  • Non-LED black design stays invisible inside the case

仕様

Brand3ccooler.com
SeriesADN512MB-A90
ModelADN512MB-A90
TypeCase Fan
Fan Size135mm
Bearing TypeBall
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesPower Cooling
Dimensions135*25mm

この商品に関する質問

Does the 135 mm square frame with 25 mm depth fit my chassis mounting holes?

The fan measures 135 mm by 135 mm and is 25 mm thick, so it matches standard 135 mm square mounting patterns.

How do I connect the 2-pin 12 V 0.27 A power lead correctly?

Plug the 2-pin connector into a 12 V fan header; the keyed plug prevents reverse polarity.

When should I expect to replace the ball-bearing fan?

Ball bearings typically last several years of continuous use; replace when noise increases or airflow drops.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。