A-Tech 32GB (4x8GB) DDR3 1333 ECC RDIMM 2Rx4 1.5V 240-Pin Server RAM
- 32GB (4 x 8GB)
- DDR3 1333 (PC3 1060…
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
A-Tech
A 32 GB quad-channel DDR3 1866 kit with ECC registered DIMMs for servers and workstations
Capacity 32GB (4 x 8GB)
This 32 GB kit contains four 8 GB DDR3 1866 ECC RDIMM modules built for registered server and workstation boards. Each module runs at 1.5 V with CL13 latency and a single-rank x4 layout. The quad-channel pack is intended for multi-socket systems that require registered error-correcting memory.
Registered buffering and on-die ECC keep data integrity intact during continuous multi-threaded workloads such as virtualisation hosts or database engines. Single-rank x4 organisation allows all four DIMMs to populate a channel without exceeding typical rank limits, sustaining bandwidth over long runs rather than short bursts.
Confirm the motherboard accepts 240-pin DDR3 RDIMMs at 1.5 V and can address 32 GB across four slots in quad-channel mode. Systems limited to unbuffered UDIMMs or to a different DDR generation will not post with these modules. Check the vendor memory-qualified list for exact population rules.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR3 Server Memory RAM |
| Model | A-Tech 8GB 1Rx4 PC3-14900R |
| Capacity | 32GB (4 x 8GB) |
| Speed | DDR3 1866 (PC3 14900) |
| CAS Latency | CL13 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Multi-channel Kit | Quad Channel Kit |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
גרסאות נוספות של דגם זה
אותה משפחה, זיכרון, קירור או תדר שונים — השווה לפני שתחליט.
Each module operates at the standard DDR3 voltage of 1.50V; total system draw depends on the platform and workload rather than the memory alone.
The board needs four DDR3 240-pin slots, a memory controller that supports registered ECC DIMMs, and BIOS that can initialise 1Rx4 modules at 1866 MHz.
No — registered and unbuffered DDR3 cannot be used together, and the memory controller must be configured for one type exclusively.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?