NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
A-Tech
8GB DDR3L 1600MHz ECC registered DIMM with 1.35V low-voltage operation for server upgrades
This A-Tech module delivers 8GB of registered ECC memory for server and workstation platforms that require DDR3L 1600 operation. The single-rank 1Rx4 design uses major-brand chips at 1.35V low voltage. It serves as a direct replacement for several Samsung part numbers listed in the specifications.
The DDR3L 1600 standard tops out at PC3L-12800 bandwidth with a CL11 latency profile on a 240-pin interface. Registered buffering adds a clock cycle for command addressing, which stabilises large-capacity configurations but prevents use in consumer boards that accept only unbuffered modules. Voltage is fixed at 1.35V; the module will not negotiate higher DDR3 voltages.
Verify that your system expressly supports DDR3L registered ECC DIMMs at 1600 MHz and accepts 1Rx4 rank organisation. Confirm the motherboard or server manual lists 1.35V operation and 240-pin RDIMM slots. This module will not function in platforms limited to unbuffered non-ECC memory or those requiring a different DDR generation.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
This single 8GB stick is a 1Rx4 registered DIMM running at DDR3L 1600 with 1.35V, matching the Samsung M393B1G70BH0-YK0 and related part numbers listed.
It indicates a 1600 MT/s data rate at 1.35V low voltage with CL11 timing, delivering the standard PC3L-12800 bandwidth for registered ECC server platforms.
The 240-pin registered DIMM form factor fits DDR3L server slots only; the registered buffer and ECC require a compatible chipset, and the 1.35V operation excludes standard 1.5V DDR3 slots.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?