NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
8GB DDR3L 1600MHz ECC registered DIMM with 1.35V low-voltage operation for server upgrades
This A-Tech module delivers 8GB of registered ECC memory for server and workstation platforms that require DDR3L 1600 operation. The single-rank 1Rx4 design uses major-brand chips at 1.35V low voltage. It serves as a direct replacement for several Samsung part numbers listed in the specifications.
The DDR3L 1600 standard tops out at PC3L-12800 bandwidth with a CL11 latency profile on a 240-pin interface. Registered buffering adds a clock cycle for command addressing, which stabilises large-capacity configurations but prevents use in consumer boards that accept only unbuffered modules. Voltage is fixed at 1.35V; the module will not negotiate higher DDR3 voltages.
Verify that your system expressly supports DDR3L registered ECC DIMMs at 1600 MHz and accepts 1Rx4 rank organisation. Confirm the motherboard or server manual lists 1.35V operation and 240-pin RDIMM slots. This module will not function in platforms limited to unbuffered non-ECC memory or those requiring a different DDR generation.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
This single 8GB stick is a 1Rx4 registered DIMM running at DDR3L 1600 with 1.35V, matching the Samsung M393B1G70BH0-YK0 and related part numbers listed.
It indicates a 1600 MT/s data rate at 1.35V low voltage with CL11 timing, delivering the standard PC3L-12800 bandwidth for registered ECC server platforms.
The 240-pin registered DIMM form factor fits DDR3L server slots only; the registered buffer and ECC require a compatible chipset, and the 1.35V operation excludes standard 1.5V DDR3 slots.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟