BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
NEMIX RAM
A 16 GB dual-channel DDR5 kit running at 4800 MHz with CL40 latency and 1.1 V operation
This NEMIX RAM kit supplies 16 GB across two 8 GB DDR5 modules rated at 4800 MHz with CAS latency 40. The unbuffered non-ECC design suits desktop platforms that accept standard UDIMMs and do not require registered memory. Builders adding capacity to a compatible DDR5 system will find the dual-channel pair straightforward to install.
Each module runs at 1.1 V and uses the 288-pin DDR5 form factor, so the kit fits motherboards wired for this generation without extra power adapters. The 1Rx8 organisation leaves room for additional modules on boards with four slots, and the low voltage helps keep thermal headroom available for other components.
The kit replaces slower DDR5 memory or smaller capacity pairs when the platform supports 4800 MHz operation and non-ECC UDIMMs. The jump is worthwhile when the motherboard and processor can run at the rated speed, delivering higher bandwidth than lower-frequency DDR5 alternatives. Systems locked to registered or ECC-only memory cannot use this kit.
| Brand | NEMIX RAM |
|---|---|
| Model | Part#: MD38400-818K2-SM-SYS-111AD-HN2-01-G2 |
| Part Number | Part#: MD38400-818K2-SM-SYS-111AD-HN2-01-G2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | 40 |
| Voltage | 1.1V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
The CL40 timing is the JEDEC standard for DDR5 4800 and sets the base response speed; tighter timings would require modules rated for lower latency at this frequency.
At 1.1 V the kit runs at the standard DDR5 voltage, so power consumption and thermals stay within normal limits for continuous use without extra cooling.
Yes, the board needs a 288-pin DDR5 DIMM socket and must accept non-ECC unbuffered memory; the 1Rx8 organisation also requires compatible memory-controller support.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
אף שפה לא תואמת.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?