Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się

NEMIX RAM

NEMIX RAM 16GB (2 x 8GB) DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN Non-ECC UDIMM Unbuffered server RAM

SKU CH-QFF9-44JE4

A 16 GB dual-channel DDR5 kit running at 4800 MHz with CL40 latency and 1.1 V operation

  • Capacity16GB (2 x 8GB)
  • SpeedDDR5 4800 (PC5 38400)
  • CAS Latency40
  • Voltage1.1V
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • 16 GB dual-channel kit boosts multitasking headroom
  • DDR5 4800 MT/s transfers data at PC5-38400 bandwidth
  • 1 V operation reduces power draw per module
  • CL40 latency keeps response times tight
  • Unbuffered non-ECC design fits standard desktop DIMM slots

Kit configuration and target use

This NEMIX RAM kit supplies 16 GB across two 8 GB DDR5 modules rated at 4800 MHz with CAS latency 40. The unbuffered non-ECC design suits desktop platforms that accept standard UDIMMs and do not require registered memory. Builders adding capacity to a compatible DDR5 system will find the dual-channel pair straightforward to install.

Build integration

Each module runs at 1.1 V and uses the 288-pin DDR5 form factor, so the kit fits motherboards wired for this generation without extra power adapters. The 1Rx8 organisation leaves room for additional modules on boards with four slots, and the low voltage helps keep thermal headroom available for other components.

Upgrade context

The kit replaces slower DDR5 memory or smaller capacity pairs when the platform supports 4800 MHz operation and non-ECC UDIMMs. The jump is worthwhile when the motherboard and processor can run at the rated speed, delivering higher bandwidth than lower-frequency DDR5 alternatives. Systems locked to registered or ECC-only memory cannot use this kit.

Najważniejsze cechy

  • 16 GB dual-channel kit boosts multitasking headroom
  • DDR5 4800 MT/s transfers data at PC5-38400 bandwidth
  • 1 V operation reduces power draw per module
  • CL40 latency keeps response times tight
  • Unbuffered non-ECC design fits standard desktop DIMM slots

Specyfikacja

BrandNEMIX RAM
ModelPart#: MD38400-818K2-SM-SYS-111AD-HN2-01-G2
Part NumberPart#: MD38400-818K2-SM-SYS-111AD-HN2-01-G2
Capacity16GB (2 x 8GB)
SpeedDDR5 4800 (PC5 38400)
CAS Latency40
Voltage1.1V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix

Pytania dotyczące tego produktu

Will the CAS latency of 40 limit performance under sustained heavy workloads?

The CL40 timing is the JEDEC standard for DDR5 4800 and sets the base response speed; tighter timings would require modules rated for lower latency at this frequency.

Does the 1.1 V operating voltage keep heat and power draw low during all-day operation?

At 1.1 V the kit runs at the standard DDR5 voltage, so power consumption and thermals stay within normal limits for continuous use without extra cooling.

Must my motherboard have 288-pin DDR5 slots and support non-ECC unbuffered DIMMs for this kit to work?

Yes, the board needs a 288-pin DDR5 DIMM socket and must accept non-ECC unbuffered memory; the 1Rx8 organisation also requires compatible memory-controller support.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.