אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Black 70mm square CPU fan with 3-pin connector

OEM Industries

OEM Industries AFB0712VHA 70mm 12V .27A 3-Pin CPU cooler

SKU CH-5YKX-2EB7Y

A 70 mm ball-bearing fan delivering 12 V and .27 A through a 3-pin connector for CPU or case cooling

  • ColorBlack
  • TypeFan only
  • Fan Size70mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • 70 mm square frame fits compact CPU sockets
  • 12 V .27 A draw keeps power use low
  • Ball bearing supports continuous operation
  • 3-pin connector enables motherboard speed control
  • 10 mm slim profile clears low-profile cases

Delta 70mm 12V CPU Cooler

This OEM Industries cooler is a 70mm square fan with a 10mm profile that mounts directly on a processor heatsink. It runs on 12 volts and draws 0.27 amps through a three-pin power connector. The ball-bearing motor and black frame are built for continuous operation inside a chassis. No LED lighting is included.

Suitable for compact builds and replacement jobs

This unit suits builders who need a low-profile 70mm fan for a tight CPU cooler stack or a small-form-factor case. It is not for buyers who want a complete heatsink assembly with heatpipes, nor for systems that require PWM speed control via a four-pin header. High-static-pressure radiator setups should look elsewhere.

70mm 3-pin 12V .27A ball-bearing spec

The single specification that decides fit is the 70mm by 10mm frame with a three-pin 12V 0.27A ball-bearing motor. Verify the motherboard header supplies three-pin voltage control and that the mounting holes match a 70mm square pattern before ordering.

נקודות עיקריות

  • 70 mm square frame fits compact CPU sockets
  • 12 V .27 A draw keeps power use low
  • Ball bearing supports continuous operation
  • 3-pin connector enables motherboard speed control
  • 10 mm slim profile clears low-profile cases

מפרט טכני

ModelAFB0712VHA
ColorBlack
TypeFan only
Fan Size70mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

שאלות על הפריט הזה

How do I install the AFB0712VHA 70mm fan and which step is often missed?

Mount the 70mm square frame using the four corner holes, connect the 3-pin plug to a 12V motherboard header, and verify the PWM signal wire is seated so speed control works.

What maintenance will the AFB0712VHA need over time?

The ball bearing is sealed; periodically blow dust from the 70mm blades and check that the 0.27A current draw stays steady — no lubrication is required.

What limit appears first when the AFB0712VHA runs continuously at 12V?

Sustained operation at 0.27A makes the ball bearing the first wear point; monitor for rising vibration or rpm drop as the grease ages.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.