OEM Industries
OEM Industries AFB0712VHA 70mm 12V .27A 3-Pin CPU cooler
A 70 mm ball-bearing fan delivering 12 V and .27 A through a 3-pin connector for CPU or case cooling
- ColorBlack
- TypeFan only
- Fan Size70mm
- Bearing TypeBall
- Power Connector3 Pin
- LEDNo
- 70 mm square frame fits compact CPU sockets
- 12 V .27 A draw keeps power use low
- Ball bearing supports continuous operation
- 3-pin connector enables motherboard speed control
- 10 mm slim profile clears low-profile cases
Delta 70mm 12V CPU Cooler
This OEM Industries cooler is a 70mm square fan with a 10mm profile that mounts directly on a processor heatsink. It runs on 12 volts and draws 0.27 amps through a three-pin power connector. The ball-bearing motor and black frame are built for continuous operation inside a chassis. No LED lighting is included.
Suitable for compact builds and replacement jobs
This unit suits builders who need a low-profile 70mm fan for a tight CPU cooler stack or a small-form-factor case. It is not for buyers who want a complete heatsink assembly with heatpipes, nor for systems that require PWM speed control via a four-pin header. High-static-pressure radiator setups should look elsewhere.
70mm 3-pin 12V .27A ball-bearing spec
The single specification that decides fit is the 70mm by 10mm frame with a three-pin 12V 0.27A ball-bearing motor. Verify the motherboard header supplies three-pin voltage control and that the mounting holes match a 70mm square pattern before ordering.
特長
- 70 mm square frame fits compact CPU sockets
- 12 V .27 A draw keeps power use low
- Ball bearing supports continuous operation
- 3-pin connector enables motherboard speed control
- 10 mm slim profile clears low-profile cases
仕様
| Model | AFB0712VHA |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 70mm |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| LED | No |
この商品に関する質問
How do I install the AFB0712VHA 70mm fan and which step is often missed?
Mount the 70mm square frame using the four corner holes, connect the 3-pin plug to a 12V motherboard header, and verify the PWM signal wire is seated so speed control works.
What maintenance will the AFB0712VHA need over time?
The ball bearing is sealed; periodically blow dust from the 70mm blades and check that the 0.27A current draw stays steady — no lubrication is required.
What limit appears first when the AFB0712VHA runs continuously at 12V?
Sustained operation at 0.27A makes the ball bearing the first wear point; monitor for rising vibration or rpm drop as the grease ages.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



