نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

OEM Industries

OEM Industries AFB0712VHA 70mm 12V .27A 3-Pin CPU cooler

SKU CH-5YKX-2EB7Y

A 70 mm ball-bearing fan delivering 12 V and .27 A through a 3-pin connector for CPU or case cooling

  • ColorBlack
  • TypeFan only
  • Fan Size70mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • 70 mm square frame fits compact CPU sockets
  • 12 V .27 A draw keeps power use low
  • Ball bearing supports continuous operation
  • 3-pin connector enables motherboard speed control
  • 10 mm slim profile clears low-profile cases

Delta 70mm 12V CPU Cooler

This OEM Industries cooler is a 70mm square fan with a 10mm profile that mounts directly on a processor heatsink. It runs on 12 volts and draws 0.27 amps through a three-pin power connector. The ball-bearing motor and black frame are built for continuous operation inside a chassis. No LED lighting is included.

Suitable for compact builds and replacement jobs

This unit suits builders who need a low-profile 70mm fan for a tight CPU cooler stack or a small-form-factor case. It is not for buyers who want a complete heatsink assembly with heatpipes, nor for systems that require PWM speed control via a four-pin header. High-static-pressure radiator setups should look elsewhere.

70mm 3-pin 12V .27A ball-bearing spec

The single specification that decides fit is the 70mm by 10mm frame with a three-pin 12V 0.27A ball-bearing motor. Verify the motherboard header supplies three-pin voltage control and that the mounting holes match a 70mm square pattern before ordering.

أبرز المميزات

  • 70 mm square frame fits compact CPU sockets
  • 12 V .27 A draw keeps power use low
  • Ball bearing supports continuous operation
  • 3-pin connector enables motherboard speed control
  • 10 mm slim profile clears low-profile cases

المواصفات

ModelAFB0712VHA
ColorBlack
TypeFan only
Fan Size70mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

أسئلة حول هذا المنتج

How do I install the AFB0712VHA 70mm fan and which step is often missed?

Mount the 70mm square frame using the four corner holes, connect the 3-pin plug to a 12V motherboard header, and verify the PWM signal wire is seated so speed control works.

What maintenance will the AFB0712VHA need over time?

The ball bearing is sealed; periodically blow dust from the 70mm blades and check that the 0.27A current draw stays steady — no lubrication is required.

What limit appears first when the AFB0712VHA runs continuously at 12V?

Sustained operation at 0.27A makes the ball bearing the first wear point; monitor for rising vibration or rpm drop as the grease ages.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.