אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר

OWC

OWC 32GB (4x8GB) DDR3 1600 CL11 ECC Registered RDIMM 1Rx4 1.5V memory upgrade

SKU CH-FGY7-YC181

ECC registered DDR3 1600 kit with four 8 GB modules for Supermicro H8 and X9DA7 motherboards

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • ECC registered design protects data integrity in servers
  • 32GB kit (4×8GB) expands memory capacity for heavy workloads
  • DDR3 1600 CL11 speed matches Supermicro H8 and X9DA7 specs
  • 5V operation keeps power draw within platform limits
  • 240-pin RDIMM form factor fits qualified Supermicro motherboards

Server memory upgrade kit

This OWC kit supplies 32GB of DDR3 1600 ECC registered memory across four 8GB RDIMMs. It targets administrators maintaining Supermicro H8DGG, H8QG6, H8QGI, H8SGL or X9DA7 platforms that require registered error-correcting modules. The 240-pin DIMMs operate at 1.5V with CL11 latency and a 1Rx4 organisation. Buyers running standard desktop boards cannot use this memory.

Replaces Supermicro MEMDR380LSL04ER16

The kit directly substitutes the Supermicro part number MEMDR380LSL04ER16, letting you extend the service life of existing infrastructure or populate a new build at lower cost. The upgrade is worthwhile when your workloads demand ECC integrity and registered signalling, and when the platform explicitly lists these motherboard series in its qualified-vendor list. Systems that accept only unbuffered DIMMs will not benefit.

Simple DIMM installation

Installation follows standard 240-pin DIMM seating: align the notch, press evenly until the latches click, then verify population rules in the board manual. Common issues include mixing these registered modules with unbuffered memory, exceeding the per-channel rank limit, or populating slots in an unsupported order. No heat spreaders are fitted, so airflow across the modules must be adequate.

נקודות עיקריות

  • ECC registered design protects data integrity in servers
  • 32GB kit (4×8GB) expands memory capacity for heavy workloads
  • DDR3 1600 CL11 speed matches Supermicro H8 and X9DA7 specs
  • 5V operation keeps power draw within platform limits
  • 240-pin RDIMM form factor fits qualified Supermicro motherboards

מפרט טכני

BrandOWC
Part Number1R6D31R4032S
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard H8DGG Series
Supermicro Motherboard H8QG6 Series
Supermicro Motherboard H8QGI Series
Supermicro Motherboard H8SGL Series
Supermicro Motherboard X9DA7 Series

גרסאות נוספות של דגם זה

5 נוספים באותה הסדרה

אותה משפחה, זיכרון, קירור או תדר שונים — השווה לפני שתחליט.

שאלות על הפריט הזה

Does the 240-pin DDR3 RDIMM fit a Supermicro X9DA7 motherboard?

Yes, the 240-pin DDR3 1600 CL11 1.5V ECC Registered RDIMM is listed as compatible with the Supermicro X9DA7 series.

How are the four 8 GB modules installed, and what step is often missed?

Install all four modules in the correct channel slots for quad-channel operation; the step often missed is enabling the ECC Registered profile in the BIOS after installation.

When should the 1Rx4 ECC Registered RDIMM be replaced?

Replace the module if the system logs uncorrectable ECC errors or fails memory diagnostics during POST.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.