暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR3 ECC registered DIMMs with gold contacts

OWC

OWC 32GB (4x8GB) DDR3 1600 CL11 ECC Registered RDIMM 1Rx4 1.5V memory upgrade

SKU CH-FGY7-YC181

ECC registered DDR3 1600 kit with four 8 GB modules for Supermicro H8 and X9DA7 motherboards

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • ECC registered design protects data integrity in servers
  • 32GB kit (4×8GB) expands memory capacity for heavy workloads
  • DDR3 1600 CL11 speed matches Supermicro H8 and X9DA7 specs
  • 5V operation keeps power draw within platform limits
  • 240-pin RDIMM form factor fits qualified Supermicro motherboards

Server memory upgrade kit

This OWC kit supplies 32GB of DDR3 1600 ECC registered memory across four 8GB RDIMMs. It targets administrators maintaining Supermicro H8DGG, H8QG6, H8QGI, H8SGL or X9DA7 platforms that require registered error-correcting modules. The 240-pin DIMMs operate at 1.5V with CL11 latency and a 1Rx4 organisation. Buyers running standard desktop boards cannot use this memory.

Replaces Supermicro MEMDR380LSL04ER16

The kit directly substitutes the Supermicro part number MEMDR380LSL04ER16, letting you extend the service life of existing infrastructure or populate a new build at lower cost. The upgrade is worthwhile when your workloads demand ECC integrity and registered signalling, and when the platform explicitly lists these motherboard series in its qualified-vendor list. Systems that accept only unbuffered DIMMs will not benefit.

Simple DIMM installation

Installation follows standard 240-pin DIMM seating: align the notch, press evenly until the latches click, then verify population rules in the board manual. Common issues include mixing these registered modules with unbuffered memory, exceeding the per-channel rank limit, or populating slots in an unsupported order. No heat spreaders are fitted, so airflow across the modules must be adequate.

特長

  • ECC registered design protects data integrity in servers
  • 32GB kit (4×8GB) expands memory capacity for heavy workloads
  • DDR3 1600 CL11 speed matches Supermicro H8 and X9DA7 specs
  • 5V operation keeps power draw within platform limits
  • 240-pin RDIMM form factor fits qualified Supermicro motherboards

仕様

BrandOWC
Part Number1R6D31R4032S
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard H8DGG Series
Supermicro Motherboard H8QG6 Series
Supermicro Motherboard H8QGI Series
Supermicro Motherboard H8SGL Series
Supermicro Motherboard X9DA7 Series

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the 240-pin DDR3 RDIMM fit a Supermicro X9DA7 motherboard?

Yes, the 240-pin DDR3 1600 CL11 1.5V ECC Registered RDIMM is listed as compatible with the Supermicro X9DA7 series.

How are the four 8 GB modules installed, and what step is often missed?

Install all four modules in the correct channel slots for quad-channel operation; the step often missed is enabling the ECC Registered profile in the BIOS after installation.

When should the 1Rx4 ECC Registered RDIMM be replaced?

Replace the module if the system logs uncorrectable ECC errors or fails memory diagnostics during POST.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。