OWC 1R6D32R416GB 16GB DDR3 1600 CL11 2Rx4 240-pin 1.5V ECC Registered RDIMM
- 16GB
- 240-Pin DDR3 ECC RD…
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
OWC
ECC registered DDR3 1600 kit with four 8 GB modules for Supermicro H8 and X9DA7 motherboards
Capacity 32GB (4 x 8GB)
This OWC kit supplies 32GB of DDR3 1600 ECC registered memory across four 8GB RDIMMs. It targets administrators maintaining Supermicro H8DGG, H8QG6, H8QGI, H8SGL or X9DA7 platforms that require registered error-correcting modules. The 240-pin DIMMs operate at 1.5V with CL11 latency and a 1Rx4 organisation. Buyers running standard desktop boards cannot use this memory.
The kit directly substitutes the Supermicro part number MEMDR380LSL04ER16, letting you extend the service life of existing infrastructure or populate a new build at lower cost. The upgrade is worthwhile when your workloads demand ECC integrity and registered signalling, and when the platform explicitly lists these motherboard series in its qualified-vendor list. Systems that accept only unbuffered DIMMs will not benefit.
Installation follows standard 240-pin DIMM seating: align the notch, press evenly until the latches click, then verify population rules in the board manual. Common issues include mixing these registered modules with unbuffered memory, exceeding the per-channel rank limit, or populating slots in an unsupported order. No heat spreaders are fitted, so airflow across the modules must be adequate.
| Brand | OWC |
|---|---|
| Part Number | 1R6D31R4032S |
| Capacity | 32GB (4 x 8GB) |
| Type | 240-Pin DDR3 ECC RDIMM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.5V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Heat Spreader | No |
| Compatible System | Supermicro Motherboard H8DGG Series Supermicro Motherboard H8QG6 Series Supermicro Motherboard H8QGI Series Supermicro Motherboard H8SGL Series Supermicro Motherboard X9DA7 Series |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
Yes, the 240-pin DDR3 1600 CL11 1.5V ECC Registered RDIMM is listed as compatible with the Supermicro X9DA7 series.
Install all four modules in the correct channel slots for quad-channel operation; the step often missed is enabling the ECC Registered profile in the BIOS after installation.
Replace the module if the system logs uncorrectable ECC errors or fails memory diagnostics during POST.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม