BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
Shenzhen Junxiangcheng Technology Co.,
A 4U rackmount chassis that holds twenty-four front 3.5-inch drives plus three internal 2.5-inch drives on a 12 Gb/s SAS expander backplane with temperature control and SGPIO
This 4U rackmount server chassis provides 24 front-accessible hot-swap bays for 3.5-inch hard drives with compatibility for 2.5-inch drives. It accommodates standard motherboards up to 12 by 13 inches and includes three internal 2.5-inch drive positions. The unit targets cloud storage, big data and security monitoring deployments needing high-density storage in a standard rack footprint.
The chassis is equipped with a 12Gb/s SAS expander backplane using Mini-SAS HD SFF-8643 connectors. It features temperature-controlled cooling, SGPIO signalling and time-sharing spin-up to manage drive start-up currents. Two hot-swappable 12038 ball-bearing fans are installed as standard across three 12 cm fan positions to maintain airflow under sustained load.
Seven vertical full-height PCI/PCIe expansion slots are available at the rear for add-in cards such as RAID controllers or network adapters. Power can be supplied by a standard ATX unit or a CRPS redundant supply ranging from 800 to 1500 watts. The 1.0 mm SGCC construction with fingerprint-resistant finish measures 650 mm deep, 437.5 mm wide and 176 mm high.
| Chassis Type | Rackmount |
|---|---|
| Form Factor | 4U |
Two 12038B ball-bearing fans are fitted as standard and the backplane includes temperature control; the third 12 cm position is available for extra airflow if needed.
The backplane uses Mini-SAS HD (SFF-8643) connectors, so you need matching SFF-8643 cables and a controller that supports 12 Gb/s SAS.
The chassis accepts standard ATX supplies from 800 W to 1500 W and motherboards up to 12"×13", plus seven full-height PCIe slots for add-in cards.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
אף שפה לא תואמת.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?