نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Silver 4U rackmount server chassis with 24 front drive bays and three 12 cm fans

Shenzhen Junxiangcheng Technology Co.,

Shenzhen Junxiangcheng Technology Co., 24-bay 4U Server Chassis 12Gb/s Expander

SKU CH-GYRD-H7PW5

A 4U rackmount chassis that holds twenty-four front 3.5-inch drives plus three internal 2.5-inch drives on a 12 Gb/s SAS expander backplane with temperature control and SGPIO

  • Chassis TypeRackmount
  • Form Factor4U
  • 24 hot-swap 3.5" drive bays with 2.5" SSD compatibility
  • 12 Gb/s expander backplane with Mini-SAS HD SFF-8643 interface
  • 4U rackmount chassis measuring 650 mm deep × 437.5 mm wide × 176 mm high
  • Two hot-swappable 12038 ball fans with temperature-controlled cooling
  • Supports standard ATX or CRPS redundant power supplies up to 1500 W

24-Bay 4U Rackmount Chassis

This 4U rackmount server chassis provides 24 front-accessible hot-swap bays for 3.5-inch hard drives with compatibility for 2.5-inch drives. It accommodates standard motherboards up to 12 by 13 inches and includes three internal 2.5-inch drive positions. The unit targets cloud storage, big data and security monitoring deployments needing high-density storage in a standard rack footprint.

12Gb/s Expander Backplane

The chassis is equipped with a 12Gb/s SAS expander backplane using Mini-SAS HD SFF-8643 connectors. It features temperature-controlled cooling, SGPIO signalling and time-sharing spin-up to manage drive start-up currents. Two hot-swappable 12038 ball-bearing fans are installed as standard across three 12 cm fan positions to maintain airflow under sustained load.

Seven Full-Height PCIe Slots

Seven vertical full-height PCI/PCIe expansion slots are available at the rear for add-in cards such as RAID controllers or network adapters. Power can be supplied by a standard ATX unit or a CRPS redundant supply ranging from 800 to 1500 watts. The 1.0 mm SGCC construction with fingerprint-resistant finish measures 650 mm deep, 437.5 mm wide and 176 mm high.

أبرز المميزات

  • 24 hot-swap 3.5" drive bays with 2.5" SSD compatibility
  • 12 Gb/s expander backplane with Mini-SAS HD SFF-8643 interface
  • 4U rackmount chassis measuring 650 mm deep × 437.5 mm wide × 176 mm high
  • Two hot-swappable 12038 ball fans with temperature-controlled cooling
  • Supports standard ATX or CRPS redundant power supplies up to 1500 W

المواصفات

Chassis TypeRackmount
Form Factor4U

أسئلة حول هذا المنتج

How loud and hot does the chassis get when all 24 bays and three 12038 fans run continuously?

Two 12038B ball-bearing fans are fitted as standard and the backplane includes temperature control; the third 12 cm position is available for extra airflow if needed.

Which host interface and cables are required to connect the 12Gb/s expander backplane to my RAID card or HBA?

The backplane uses Mini-SAS HD (SFF-8643) connectors, so you need matching SFF-8643 cables and a controller that supports 12 Gb/s SAS.

Will my existing ATX power supply and standard 12"×13" motherboard fit without modification?

The chassis accepts standard ATX supplies from 800 W to 1500 W and motherboards up to 12"×13", plus seven full-height PCIe slots for add-in cards.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.