Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Green rectangular PCB with silver PCIe x8 edge connector and two black SFF-8612 ports at the rear bracket

LetLinkSo

LetLinkSo LLS-CD-1PC2OC-01 PCIe 4.0 x8 to dual Oculink SFF-8612 expansion card

SKU CH-HW7W-DXTFH

Adds two Oculink SFF-8612 ports over a PCIe 4.0 x8 slot for NVMe SSDs or eGPUs at 128 Gbps

  • TypePCIe to Oculink Adapter
  • StandardPCIe 4.0
  • Data Transfer Rate16GT/s (per lane)
  • Operating Systems SupportedWindows,Windows Server and Linux
  • CompatibilityPCIe 4.0
  • SpecificationsPCIe x8 to 2-port Oculink

Adapter Type PCIe x8 to 4-Port Oculink / External

  • Expands PCIe slot to two Oculink SFF-8612 ports for NVMe and eGPU
  • PCIe 4.0 at 16 GT/s per lane delivers 128 Gbps total bandwidth
  • Welded connector housing secures SFF-8611 cable connections against strain
  • Supports booting from attached NVMe drives for flexible system startup
  • Works with Windows, Windows Server and Linux without driver installation

Expanded Oculink Connectivity

The LetLinkSo LLS-CD-1PC2OC-01 adds two Oculink SFF-8612 x4 ports through a single PCIe 4.0 x8 slot, giving desktop builders a direct path to external NVMe storage or eGPU enclosures that use SFF-8611 cables. It targets users whose motherboards lack native Oculink headers but have a free x8 electrical slot. Buyers who need more than two ports or who only have x4 or x1 slots available cannot use this card.

Welded Connector Construction

Each Oculink housing is welded to the PCB rather than surface-mounted, which reduces flex during repeated cable insertion and removal. The x8 edge connector splits into two independent x4 links, so each port can run at the full PCIe 4.0 16 GT/s per lane rate without sharing bandwidth. Systems without bifurcation support in the BIOS will not see both ports simultaneously.

Boot Support And Driver-Free Operation

The adapter presents attached NVMe drives as bootable devices, allowing the operating system to load directly from external storage without an internal drive. No proprietary drivers are required; Windows, Windows Server and Linux all recognise the card natively on insertion. The package contains only the adapter board itself, so SFF-8611 cables and any mounting brackets must be sourced separately.

Istaknuto

  • Expands PCIe slot to two Oculink SFF-8612 ports for NVMe and eGPU
  • PCIe 4.0 at 16 GT/s per lane delivers 128 Gbps total bandwidth
  • Welded connector housing secures SFF-8611 cable connections against strain
  • Supports booting from attached NVMe drives for flexible system startup
  • Works with Windows, Windows Server and Linux without driver installation

Specifikacije

BrandLetLinkSo
SeriesPCIe to Oculink Card
ModelLLS-CD-1PC2OC-01
TypePCIe to Oculink Adapter
StandardPCIe 4.0
Data Transfer Rate16GT/s (per lane)
Operating Systems SupportedWindows,Windows Server and Linux
CompatibilityPCIe 4.0
SpecificationsPCIe x8 to 2-port Oculink
FeaturesEXPANDED CONNECTIVITY
Weight1 lbs
Package Contents1 x PCIe x8 to 2-port Oculink Adapter

Druge verzije ovog modela

još 4 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

What PCIe standard and lane count does the LLS-CD-1PC2OC-01 use, and what total bandwidth does that provide?

The card uses PCIe 4.0 across eight lanes at 16 GT/s per lane, delivering 128 Gbps total throughput.

What physical slot and bracket space does this dual Oculink SFF-8612 adapter require?

It needs a PCIe x8 or larger slot and occupies one low-profile bracket opening for the two SFF-8612 ports.

How is the card installed, and which step do builders often miss?

Insert the card into the slot, secure the bracket screw, attach SFF-8611 cables to the SFF-8612 ports, then verify the motherboard BIOS sets the slot to PCIe 4.0 x8 mode — many leave it on auto and get reduced width.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.