Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Green rectangular PCB with silver PCIe x8 edge connector and two black SFF-8612 ports at the rear bracket

LetLinkSo

LetLinkSo LLS-CD-1PC2OC-01 PCIe 4.0 x8 to dual Oculink SFF-8612 expansion card

SKU CH-HW7W-DXTFH

Adds two Oculink SFF-8612 ports over a PCIe 4.0 x8 slot for NVMe SSDs or eGPUs at 128 Gbps

  • TypePCIe to Oculink Adapter
  • StandardPCIe 4.0
  • Data Transfer Rate16GT/s (per lane)
  • Operating Systems SupportedWindows,Windows Server and Linux
  • CompatibilityPCIe 4.0
  • SpecificationsPCIe x8 to 2-port Oculink

Adapter Type PCIe x8 to 4-Port Oculink / External

  • Expands PCIe slot to two Oculink SFF-8612 ports for NVMe and eGPU
  • PCIe 4.0 at 16 GT/s per lane delivers 128 Gbps total bandwidth
  • Welded connector housing secures SFF-8611 cable connections against strain
  • Supports booting from attached NVMe drives for flexible system startup
  • Works with Windows, Windows Server and Linux without driver installation

Expanded Oculink Connectivity

The LetLinkSo LLS-CD-1PC2OC-01 adds two Oculink SFF-8612 x4 ports through a single PCIe 4.0 x8 slot, giving desktop builders a direct path to external NVMe storage or eGPU enclosures that use SFF-8611 cables. It targets users whose motherboards lack native Oculink headers but have a free x8 electrical slot. Buyers who need more than two ports or who only have x4 or x1 slots available cannot use this card.

Welded Connector Construction

Each Oculink housing is welded to the PCB rather than surface-mounted, which reduces flex during repeated cable insertion and removal. The x8 edge connector splits into two independent x4 links, so each port can run at the full PCIe 4.0 16 GT/s per lane rate without sharing bandwidth. Systems without bifurcation support in the BIOS will not see both ports simultaneously.

Boot Support And Driver-Free Operation

The adapter presents attached NVMe drives as bootable devices, allowing the operating system to load directly from external storage without an internal drive. No proprietary drivers are required; Windows, Windows Server and Linux all recognise the card natively on insertion. The package contains only the adapter board itself, so SFF-8611 cables and any mounting brackets must be sourced separately.

Pontos fortes

  • Expands PCIe slot to two Oculink SFF-8612 ports for NVMe and eGPU
  • PCIe 4.0 at 16 GT/s per lane delivers 128 Gbps total bandwidth
  • Welded connector housing secures SFF-8611 cable connections against strain
  • Supports booting from attached NVMe drives for flexible system startup
  • Works with Windows, Windows Server and Linux without driver installation

Especificações

BrandLetLinkSo
SeriesPCIe to Oculink Card
ModelLLS-CD-1PC2OC-01
TypePCIe to Oculink Adapter
StandardPCIe 4.0
Data Transfer Rate16GT/s (per lane)
Operating Systems SupportedWindows,Windows Server and Linux
CompatibilityPCIe 4.0
SpecificationsPCIe x8 to 2-port Oculink
FeaturesEXPANDED CONNECTIVITY
Weight1 lbs
Package Contents1 x PCIe x8 to 2-port Oculink Adapter

Outras versões deste modelo

Mais 4 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

What PCIe standard and lane count does the LLS-CD-1PC2OC-01 use, and what total bandwidth does that provide?

The card uses PCIe 4.0 across eight lanes at 16 GT/s per lane, delivering 128 Gbps total throughput.

What physical slot and bracket space does this dual Oculink SFF-8612 adapter require?

It needs a PCIe x8 or larger slot and occupies one low-profile bracket opening for the two SFF-8612 ports.

How is the card installed, and which step do builders often miss?

Insert the card into the slot, secure the bracket screw, attach SFF-8611 cables to the SFF-8612 ports, then verify the motherboard BIOS sets the slot to PCIe 4.0 x8 mode — many leave it on auto and get reduced width.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.