Zyvpee DBTB0838B2S 80mm case fan 12V 2.1A 4-wire 7000 RPM 80 CFM 50 dBA 80x76mm
- Case Fan
- Case
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
LUOM
Connects a 2.5 inch SATA drive via USB 3.0 with UASP up to 5 Gbps, tool-free, includes a protective pouch, supports drives up to 2 TB
The LUOM Eyield E05 turns any 2.5 inch SATA SSD or HDD between 7 mm and 9.5 mm thick into a portable USB 3.0 drive. It accepts drives up to 2 TB and works with Windows, Linux and Mac OS without installing drivers. The tool-free design lets you swap drives in seconds and a supplied PU bag protects the unit during transport.
The enclosure uses a USB 3.0 connection rated at 5 Gbps and supports UASP, which the supplier says is 20 percent faster than standard USB 3.0 for typical workloads. Actual throughput will vary with the drive fitted, the host controller and the file mix, so sustained speeds are usually lower than the interface maximum. The drive remains backward compatible with SATA II and I interfaces.
Your drive must be a 2.5 inch SATA model with a thickness of 7 mm to 9.5 mm and a capacity no larger than 2 TB. The host device needs a free USB 3.0 port to reach the advertised rate; USB 2.0 ports will work but at a much reduced speed. No external power supply is mentioned, so the enclosure draws power from the USB port itself.
| Brand | LUOM |
|---|---|
| Model | Eyield E05 |
| Color | Black |
| Part Number | Eyield E05 |
| Mobile Rack Interface | SATA I/II/III |
| Protection Case | Single Drive |
| Compatible Products | 2.5" |
The enclosure is bus-powered from the USB 3.0 port, so it draws no external power while the drive runs continuously.
A USB 3.0 Type-A port is required; the cable plugs directly into it with no extra adapter.
Yes, the SATA I/II/III interface is backward compatible, so a SATA I drive will be detected and accessible.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
No language matches that.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?