Zyvpee DBTB0838B2S 80mm case fan 12V 2.1A 4-wire 7000 RPM 80 CFM 50 dBA 80x76mm
- Case Fan
- Case
Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.
LUOM
Connects a 2.5 inch SATA drive via USB 3.0 with UASP up to 5 Gbps, tool-free, includes a protective pouch, supports drives up to 2 TB
The LUOM Eyield E05 turns any 2.5 inch SATA SSD or HDD between 7 mm and 9.5 mm thick into a portable USB 3.0 drive. It accepts drives up to 2 TB and works with Windows, Linux and Mac OS without installing drivers. The tool-free design lets you swap drives in seconds and a supplied PU bag protects the unit during transport.
The enclosure uses a USB 3.0 connection rated at 5 Gbps and supports UASP, which the supplier says is 20 percent faster than standard USB 3.0 for typical workloads. Actual throughput will vary with the drive fitted, the host controller and the file mix, so sustained speeds are usually lower than the interface maximum. The drive remains backward compatible with SATA II and I interfaces.
Your drive must be a 2.5 inch SATA model with a thickness of 7 mm to 9.5 mm and a capacity no larger than 2 TB. The host device needs a free USB 3.0 port to reach the advertised rate; USB 2.0 ports will work but at a much reduced speed. No external power supply is mentioned, so the enclosure draws power from the USB port itself.
| Brand | LUOM |
|---|---|
| Model | Eyield E05 |
| Color | Black |
| Part Number | Eyield E05 |
| Mobile Rack Interface | SATA I/II/III |
| Protection Case | Single Drive |
| Compatible Products | 2.5" |
The enclosure is bus-powered from the USB 3.0 port, so it draws no external power while the drive runs continuously.
A USB 3.0 Type-A port is required; the cable plugs directly into it with no extra adapter.
Yes, the SATA I/II/III interface is backward compatible, so a SATA I drive will be detected and accessible.
Também nesta secção
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
O que paga, e a moeda em que vê os preços.
Enviado da sua carteira ao finalizar a compra
Apenas informativo — o catálogo está em dólares
Nenhuma moeda corresponde.
Escolha o idioma em que o site lhe fala.
No language matches that.
Ainda não tem conta?
Já tem conta?
Não existe reposição automática: esta loja não envia qualquer e-mail, pelo que não há nenhum link de utilização única para pedir. Deixe o endereço na conta e ele será tratado manualmente.
Pedido registado
Não vai chegar nada à sua caixa de entrada — esta loja não envia qualquer e-mail. Alguém trata disto manualmente.
Recordou-se dela?