Zyvpee DBTB0838B2S 80mm case fan 12V 2.1A 4-wire 7000 RPM 80 CFM 50 dBA 80x76mm
- Case Fan
- Case
Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.
LUOM
Connects a 2.5 inch SATA drive via USB 3.0 with UASP up to 5 Gbps, tool-free, includes a protective pouch, supports drives up to 2 TB
The LUOM Eyield E05 turns any 2.5 inch SATA SSD or HDD between 7 mm and 9.5 mm thick into a portable USB 3.0 drive. It accepts drives up to 2 TB and works with Windows, Linux and Mac OS without installing drivers. The tool-free design lets you swap drives in seconds and a supplied PU bag protects the unit during transport.
The enclosure uses a USB 3.0 connection rated at 5 Gbps and supports UASP, which the supplier says is 20 percent faster than standard USB 3.0 for typical workloads. Actual throughput will vary with the drive fitted, the host controller and the file mix, so sustained speeds are usually lower than the interface maximum. The drive remains backward compatible with SATA II and I interfaces.
Your drive must be a 2.5 inch SATA model with a thickness of 7 mm to 9.5 mm and a capacity no larger than 2 TB. The host device needs a free USB 3.0 port to reach the advertised rate; USB 2.0 ports will work but at a much reduced speed. No external power supply is mentioned, so the enclosure draws power from the USB port itself.
| Brand | LUOM |
|---|---|
| Model | Eyield E05 |
| Color | Black |
| Part Number | Eyield E05 |
| Mobile Rack Interface | SATA I/II/III |
| Protection Case | Single Drive |
| Compatible Products | 2.5" |
The enclosure is bus-powered from the USB 3.0 port, so it draws no external power while the drive runs continuously.
A USB 3.0 Type-A port is required; the cable plugs directly into it with no extra adapter.
Yes, the SATA I/II/III interface is backward compatible, so a SATA I drive will be detected and accessible.
Juga di rak ini
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.
Apa yang anda hantar untuk membayar, dan mata wang yang anda guna untuk membaca harga.
Dihantar daripada dompet anda semasa semak keluar
Untuk paparan sahaja — katalog diberi harga dalam USD
Tiada mata wang yang sepadan.
Pilih bahasa yang digunakan oleh laman web ini.
No language matches that.
Pengguna baharu?
Sudah mempunyai akaun?
Tiada set semula automatik: kedai ini tidak menghantar sebarang e-mel, jadi tiada pautan sekali guna untuk diminta. Biarkan alamat pada akaun tersebut, ia akan diuruskan secara manual.
Permintaan direkodkan
Tiada apa-apa akan sampai ke peti masuk anda — kedai ini tidak menghantar sebarang e-mel. Seseorang akan menguruskannya secara manual.
Sudah teringat?