Zyvpee DBTB0838B2S 80mm case fan 12V 2.1A 4-wire 7000 RPM 80 CFM 50 dBA 80x76mm
- Case Fan
- Case
Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.
LUOM
Connects a 2.5 inch SATA drive via USB 3.0 with UASP up to 5 Gbps, tool-free, includes a protective pouch, supports drives up to 2 TB
The LUOM Eyield E05 turns any 2.5 inch SATA SSD or HDD between 7 mm and 9.5 mm thick into a portable USB 3.0 drive. It accepts drives up to 2 TB and works with Windows, Linux and Mac OS without installing drivers. The tool-free design lets you swap drives in seconds and a supplied PU bag protects the unit during transport.
The enclosure uses a USB 3.0 connection rated at 5 Gbps and supports UASP, which the supplier says is 20 percent faster than standard USB 3.0 for typical workloads. Actual throughput will vary with the drive fitted, the host controller and the file mix, so sustained speeds are usually lower than the interface maximum. The drive remains backward compatible with SATA II and I interfaces.
Your drive must be a 2.5 inch SATA model with a thickness of 7 mm to 9.5 mm and a capacity no larger than 2 TB. The host device needs a free USB 3.0 port to reach the advertised rate; USB 2.0 ports will work but at a much reduced speed. No external power supply is mentioned, so the enclosure draws power from the USB port itself.
| Brand | LUOM |
|---|---|
| Model | Eyield E05 |
| Color | Black |
| Part Number | Eyield E05 |
| Mobile Rack Interface | SATA I/II/III |
| Protection Case | Single Drive |
| Compatible Products | 2.5" |
The enclosure is bus-powered from the USB 3.0 port, so it draws no external power while the drive runs continuously.
A USB 3.0 Type-A port is required; the cable plugs directly into it with no extra adapter.
Yes, the SATA I/II/III interface is backward compatible, so a SATA I drive will be detected and accessible.
Tot din acest raion
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
În ce monedă plătiți și în ce monedă citiți prețurile.
Trimis din portofelul dumneavoastră la finalizarea comenzii
Doar pentru afișare — catalogul este exprimat în dolari
Nicio monedă nu corespunde.
Alegeți limba în care vă vorbește site-ul.
No language matches that.
Prima vizită?
Aveți deja un cont?
Nu există o resetare automată: acest magazin nu trimite niciun e-mail, deci nu există niciun link de unică folosință de solicitat. Lăsați adresa în cont. Va fi tratată manual.
Cerere înregistrată
Nu veți primi nimic în căsuța de e-mail — acest magazin nu trimite niciun e-mail. Cineva se ocupă de asta manual.
V-ați amintit-o?