Zyvpee DBTB0838B2S 80mm case fan 12V 2.1A 4-wire 7000 RPM 80 CFM 50 dBA 80x76mm
- Case Fan
- Case
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
LUOM
Connects a 2.5 inch SATA drive via USB 3.0 with UASP up to 5 Gbps, tool-free, includes a protective pouch, supports drives up to 2 TB
The LUOM Eyield E05 turns any 2.5 inch SATA SSD or HDD between 7 mm and 9.5 mm thick into a portable USB 3.0 drive. It accepts drives up to 2 TB and works with Windows, Linux and Mac OS without installing drivers. The tool-free design lets you swap drives in seconds and a supplied PU bag protects the unit during transport.
The enclosure uses a USB 3.0 connection rated at 5 Gbps and supports UASP, which the supplier says is 20 percent faster than standard USB 3.0 for typical workloads. Actual throughput will vary with the drive fitted, the host controller and the file mix, so sustained speeds are usually lower than the interface maximum. The drive remains backward compatible with SATA II and I interfaces.
Your drive must be a 2.5 inch SATA model with a thickness of 7 mm to 9.5 mm and a capacity no larger than 2 TB. The host device needs a free USB 3.0 port to reach the advertised rate; USB 2.0 ports will work but at a much reduced speed. No external power supply is mentioned, so the enclosure draws power from the USB port itself.
| Brand | LUOM |
|---|---|
| Model | Eyield E05 |
| Color | Black |
| Part Number | Eyield E05 |
| Mobile Rack Interface | SATA I/II/III |
| Protection Case | Single Drive |
| Compatible Products | 2.5" |
The enclosure is bus-powered from the USB 3.0 port, so it draws no external power while the drive runs continuously.
A USB 3.0 Type-A port is required; the cable plugs directly into it with no extra adapter.
Yes, the SATA I/II/III interface is backward compatible, so a SATA I drive will be detected and accessible.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
No language matches that.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?