Raidmax NV-A120R3 RGB 3×120mm case fan 20-25 dBA 30-35 CFM
- Case Fan
- 120mm
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
Raidmax
Five 120 mm PWM fans deliver 30–35 CFM at under 1600 RPM while running at 20–25 dBA with addressable RGB lighting
Option 5 Packs
This pack contains five 120 mm PWM fans with addressable RGB LEDs. The fans are aimed at builders who want coordinated lighting and a single-connector power solution for a standard ATX chassis. Each unit draws power through a 6-pin connector and spins at up to 1600 RPM. The set suits fresh builds or upgrades where a unified lighting theme is desired.
At full speed the fans produce between 20 and 25 dBA while moving 30 to 35 CFM of air. The PWM curve lets the motherboard lower RPM under light loads, reducing noise further during idle or office work. The 6-pin power input feeds both the motor and the LEDs from one header, keeping cable routing simple. Thermal performance is adequate for mid-range components in typical airflow cases.
The kit replaces a mix of mismatched 120 mm fans or a basic three-fan configuration that lacks lighting control. The jump is worth it when the builder wants synchronised RGB effects — gradient, flashing and breathing modes — across all intake and exhaust positions without buying separate controllers. It does not suit radiators that demand higher static pressure or systems limited to 3-pin or 4-pin fan headers only.
| Brand | Raidmax |
|---|---|
| Type | Case Fan |
| Fan Size | 120mm |
| RPM | <1600 RPM |
| Air Flow | 30-35 CFM |
| Noise Level | 20 - 25 dBA |
| Power Connector | 6 pin |
| Color | Multicolor |
| LED | RGB |
Otras versiones de este modelo
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
Plug the 6-pin cable into a compatible motherboard header or the included controller; forcing it into a standard 4-pin PWM header will damage the pins and prevent RGB control.
Clean dust from the blades and frame every few months with compressed air; the sleeve bearing is not user-serviceable, so replace any fan that develops rattling or drops below 30 CFM airflow.
At the top speed of 1600 RPM the noise level reaches 25 dBA, which is the first limit you will hear during sustained loads before thermal throttling becomes a concern.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
No language matches that.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?